Mike Black W9MDB
746ba96eb1
Fix netrigctl_stop_morse
2021-10-30 16:42:18 -05:00
Michael Black
4ad28fd5ab
Merge pull request #846 from df7cb/netrigctl_stop_morse
...
Implement netrigctl_stop_morse
2021-10-28 23:28:41 -05:00
Mike Black W9MDB
b9c86da0fb
For kenwood.c allow another 2 transacation_reads after ? return
...
For the TS-2000 doing IF; after RX; was returning ? but still returned IF response later
https://github.com/Hamlib/Hamlib/issues/844
2021-10-28 17:28:27 -05:00
Mike Black W9MDB
0309a34d02
Change kenwood.c to not do a set_vfo if current_vfo already is set
...
https://github.com/Hamlib/Hamlib/issues/844
2021-10-28 16:42:07 -05:00
Christoph Berg
8cba9d7ee9
Implement netrigctl_stop_morse
...
This allows \stop_morse to work across rigctld.
Tested with IC-7610.
2021-10-28 22:21:04 +02:00
Mike Black W9MDB
ab0d25ce3b
Remove TS570 code from newcat.c....duh...
...
https://github.com/Hamlib/Hamlib/issues/840
2021-10-28 08:34:37 -05:00
Mike Black W9MDB
022d4e4f67
Change Elecraft to remove AB3 command as it took 650ms to execute.
...
We now just set VFOB freq to VFOA freq when setting split mode
https://github.com/Hamlib/Hamlib/issues/842
2021-10-27 23:21:28 -05:00
Mike Black W9MDB
1dc9f56e13
Add debug to kenwood_set_split_vfo
...
https://github.com/Hamlib/Hamlib/issues/842
2021-10-27 08:48:59 -05:00
Mike Black W9MDB
eb8c8d8e5f
Add comment to kenwood.c
2021-10-27 08:40:03 -05:00
Mike Black W9MDB
5f9153cd0a
Make TS570 KEYSPD patch apply to TS570S too
...
Fix the TS570 KEYSPD get_level to return the correct value
https://github.com/Hamlib/Hamlib/issues/840
2021-10-25 07:13:38 -05:00
Mike Black W9MDB
a755d82ffd
Fix newcat.c vfoB detection when in split mode
...
Add TRACE statements to chase down Yaesu bugs
https://github.com/Hamlib/Hamlib/issues/838
2021-10-24 14:49:03 -05:00
Mike Black W9MDB
47ca65cc67
Allow for firmware bug in KEYSPD on the TS-570D
...
Not sure this is the real fix or if the rig rate is correct instead -- to be tested
https://github.com/Hamlib/Hamlib/issues/840
2021-10-24 08:22:08 -05:00
Mike Black W9MDB
739d808d6a
Remove stray break statement in ft1000mp.c
...
Probably affected XIT function
2021-10-23 23:53:51 -05:00
Mike Black W9MDB
0e3393a1e0
Add copy VFOA>B for Elecraft K3, KX2, and KX3 when split mode is requested to ensure we avoid cross band error
...
https://github.com/Hamlib/Hamlib/issues/839
2021-10-23 15:53:01 -05:00
Mike Black W9MDB
f5abd7a176
Add 10ms post_write_delay for the K3 -- was not going into split
...
Seems faster computers are speeding up serial I/O
https://github.com/Hamlib/Hamlib/issues/839
2021-10-23 13:24:36 -05:00
Mike Black W9MDB
1ca3d34010
Change Yaeus send_voice_mem to built-in function rather than FUNC implementaion
...
https://github.com/Hamlib/Hamlib/issues/830
2021-10-22 07:29:27 -05:00
Mike Black W9MDB
28cdd67161
Fix newcat.c VOICE_MEM format
...
https://github.com/Hamlib/Hamlib/issues/830
2021-10-21 17:40:07 -05:00
Mike Black W9MDB
c9d7a924c7
Add RIG_FUNC_SEND_VOICE_MEM with FT991 as the 1st implementation
...
https://github.com/Hamlib/Hamlib/issues/830
2021-10-21 17:36:54 -05:00
Mike Black W9MDB
efe54c80c5
Change IC-785x model string to IC-7850/7851 to better identify for users
2021-10-21 09:53:09 -05:00
Mike Black W9MDB
a312efb96b
Fix funcube.c compilation some more
2021-10-21 07:10:22 -05:00
Mike Black W9MDB
f77dc09924
Fix funcube.c compilation
2021-10-21 06:56:34 -05:00
Mike Black W9MDB
3ae48c507d
Fix compilation problem with funcube.c
...
https://github.com/Hamlib/Hamlib/issues/829
2021-10-20 23:00:13 -05:00
Mike Black W9MDB
9186702776
Add get_mode to funcube, funcubepro, and rs_hfiq
...
https://github.com/Hamlib/Hamlib/issues/829
2021-10-20 22:54:11 -05:00
Mike Black W9MDB
6553373ad1
Fix kenwood_get_mode for Elecraft K4 to use MD$ to get mode
...
https://github.com/Hamlib/Hamlib/issues/825
2021-10-20 16:21:43 -05:00
Mike Black W9MDB
c83949ae6d
For Icom rigs like IC910H and IC9700 Main/Sub are only used for split and satmode
...
Otherwise VFOA/B can be used on either Main or Sub VFOs
So if Main is requested and not in split/satmode then VFOA is assumed -- this case was fixed
And if Sub is requested and not in split/satmode then VFOB is assumed -- this was already true
https://github.com/Hamlib/Hamlib/issues/832
2021-10-20 15:56:11 -05:00
Mike Black W9MDB
5e90774728
Change detection of Elecraft K4 in k3.c to use VFOB commands
...
https://github.com/Hamlib/Hamlib/issues/825
2021-10-20 08:52:13 -05:00
Mike Black W9MDB
6b6156c416
Fix Elecraft K3 BW$ length read warning
...
https://github.com/Hamlib/Hamlib/issues/825
2021-10-19 06:46:25 -05:00
Mike Black W9MDB
a15726e652
For the Elecraft K4 changing mode on either VFO while in split will now change mode on the other VFO
...
https://github.com/Hamlib/Hamlib/issues/830
2021-10-19 06:42:37 -05:00
Mike Black W9MDB
5c29e099a9
Add RIG_FUNCTION_SEND_VOICE_MEM for FT991
...
https://github.com/Hamlib/Hamlib/issues/830
2021-10-18 23:55:42 -05:00
Mike Black W9MDB
024f7f061c
Add RIG_MODE_IQ for FunCube Pro Plus and RS-HFIQ
...
https://github.com/Hamlib/Hamlib/issues/829
2021-10-18 23:01:38 -05:00
Mike Black W9MDB
0cd7e5cc16
Update debug statement in elecraft.c to show is_k4
2021-10-18 22:59:18 -05:00
Mike Black W9MDB
c0aeb14a2a
Change Elecraft K4 to use AB3;FT1 instead of AB0;FT1
...
https://github.com/Hamlib/Hamlib/issues/825
2021-10-18 22:41:07 -05:00
Mike Black W9MDB
dc09191f07
Add copy A/B for Elecraft K4 to avoid cross-band error when setting split
...
https://github.com/Hamlib/Hamlib/issues/825
2021-10-18 15:33:50 -05:00
Mike Black W9MDB
736072bbaf
Fix k3.c case of BW command
2021-10-18 15:27:30 -05:00
Mike Black W9MDB
84df12919f
Fix Elecraft K3 DT/DT$ command to expect the correct answer length
...
https://github.com/Hamlib/Hamlib/issues/825
2021-10-17 22:54:09 -05:00
Mike Black W9MDB
899cd71b1d
Fix Elecraft K3/K4 bandwidth BW to expect 6 instead of 7 response
...
https://github.com/Hamlib/Hamlib/issues/825
2021-10-17 22:49:50 -05:00
Mike Black W9MDB
49f3452bf2
Add send_morse to Yaesu rigs -- message is the number of the memory to be played
2021-10-17 17:53:02 -05:00
Mike Black W9MDB
569f21c7fe
Revert "Start to normalize Icom cmd detection"
...
This reverts commit 1ade49f3d5
2021-10-17 16:02:30 -05:00
Mike Black W9MDB
80f7378bf5
Arrgghhh..fix spelling of PKTLSB
2021-10-17 13:14:57 -05:00
Mike Black W9MDB
3dde8030a0
Add PKTUSB PKTLSB to allowed rig modes for Icom in set_dsp_flt
2021-10-17 13:11:11 -05:00
Mike Black W9MDB
1ade49f3d5
Start to normalize Icom cmd detection
2021-10-17 13:10:15 -05:00
Mike Black W9MDB
1b10d113f2
Add debug info to k3_set_mode
...
https://github.com/Hamlib/Hamlib/issues/825
2021-10-17 06:54:07 -05:00
Mike Black W9MDB
25e5f59300
Fix k3.c build
...
https://github.com/Hamlib/Hamlib/issues/825
2021-10-17 06:47:26 -05:00
Mike Black W9MDB
015d79cc80
Fix k3_set_mode for K4 VFOB case
...
https://github.com/Hamlib/Hamlib/issues/825
2021-10-17 06:43:18 -05:00
Mike Black W9MDB
6c43e5c6ac
Fix bogus "not supported" message when icom_set_mode_x26 is called
2021-10-16 23:29:05 -05:00
Mike Black W9MDB
83b7243946
Change icom_set_mode_with_data to reuse existing filter# if RIG_PASSBAND_NOCHANGE is requested
...
https://github.com/Hamlib/Hamlib/issues/827
2021-10-15 12:56:17 -05:00
Mike Black W9MDB
50512b4bf9
Fix Elecraft K4 set_mode to work with VFOB
...
https://github.com/Hamlib/Hamlib/issues/825
2021-10-15 12:05:46 -05:00
Mike Black W9MDB
891ca6ed75
Fix TS450 and TS690 split check -- should be using IF status now
...
Should work with any rigs that don't have split status too in case there are any.
https://github.com/Hamlib/Hamlib/issues/826
2021-10-15 12:02:41 -05:00
Mike Black W9MDB
4c634f8c04
Fix FT1000MP set_split_vfo
...
Testing shows RX=VFOA, TX=VFOB in contrast to the manual saying the opposite
https://github.com/Hamlib/Hamlib/issues/824
2021-10-14 16:34:42 -05:00
Mike Black W9MDB
4c1cbf0aa9
Change flrig FSK/PSK modes to use RTTY instead of PKTUSB
...
https://github.com/Hamlib/Hamlib/issues/823
2021-10-14 10:50:06 -05:00
