hamlib/src/rotator.c

/*
 *  Hamlib Interface - main file
 *  Copyright (c) 2000-2012 by Stephane Fillod
 *  Copyright (c) 2000-2003 by Frank Singleton
 *
 *
 *   This library is free software; you can redistribute it and/or
 *   modify it under the terms of the GNU Lesser General Public
 *   License as published by the Free Software Foundation; either
 *   version 2.1 of the License, or (at your option) any later version.
 *
 *   This library is distributed in the hope that it will be useful,
 *   but WITHOUT ANY WARRANTY; without even the implied warranty of
 *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 *   Lesser General Public License for more details.
 *
 *   You should have received a copy of the GNU Lesser General Public
 *   License along with this library; if not, write to the Free Software
 *   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
 *
 */

/**
 * \addtogroup rotator
 * @{
 */

/**
 * \file src/rotator.c
 * \brief Rotator interface
 * \author Stephane Fillod
 * \date 2000-2012
 *
 * Hamlib interface is a frontend implementing rotator wrapper functions.
 */


/*! \page rot Rotator interface
 *
 * Rotator can be any kind of azimuth or azimuth and elevation controlled
 * antenna system.
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <stdio.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>


#include "hamlib/rotator.h"
#include "serial.h"
#include "parallel.h"
#include "usb_port.h"
#include "network.h"
#include "rot_conf.h"
#include "token.h"


#ifndef DOC_HIDDEN

#if defined(WIN32) && !defined(__CYGWIN__)
#define DEFAULT_SERIAL_PORT "\\\\.\\COM1"
#elif BSD
#define DEFAULT_SERIAL_PORT "/dev/cuaa0"
#elif MACOSX
#define DEFAULT_SERIAL_PORT "/dev/cu.usbserial"
#else
#define DEFAULT_SERIAL_PORT "/dev/ttyS0"
#endif

#if defined(WIN32)
#define DEFAULT_PARALLEL_PORT "\\\\.\\$VDMLPT1"
#elif defined(HAVE_DEV_PPBUS_PPI_H)
#define DEFAULT_PARALLEL_PORT "/dev/ppi0"
#else
#define DEFAULT_PARALLEL_PORT "/dev/parport0"
#endif

#define CHECK_ROT_ARG(r) (!(r) || !(r)->caps || !(r)->state.comm_state)

/*
 * Data structure to track the opened rot (by rot_open)
 */
struct opened_rot_l {
		ROT *rot;
		struct opened_rot_l *next;
};
static struct opened_rot_l *opened_rot_list = { NULL };

/*
 * track which rot is opened (with rot_open)
 * needed at least for transceive mode
 */
static int add_opened_rot(ROT *rot)
{
	struct opened_rot_l *p;
	p = (struct opened_rot_l *)malloc(sizeof(struct opened_rot_l));
	if (!p)
			return -RIG_ENOMEM;
	p->rot = rot;
	p->next = opened_rot_list;
	opened_rot_list = p;
	return RIG_OK;
}

static int remove_opened_rot(ROT *rot)
{
	struct opened_rot_l *p,*q;
	q = NULL;

	for (p=opened_rot_list; p; p=p->next) {
		if (p->rot == rot) {
			if (q == NULL) {
				opened_rot_list = opened_rot_list->next;
			} else {
				q->next = p->next;
			}
			free(p);
			return RIG_OK;
		}
		q = p;
	}
	return -RIG_EINVAL;	/* Not found in list ! */
}
#endif /* !DOC_HIDDEN */

/**
 * \brief execs cfunc() on each opened rot
 * \param cfunc	The function to be executed on each rot
 * \param data	Data pointer to be passed to cfunc()
 *
 *  Calls cfunc() function for each opened rot.
 *  The contents of the opened rot table
 *  is processed in random order according to a function
 *  pointed to by \a cfunc, whic is called with two arguments,
 *  the first pointing to the #ROT handle, the second
 *  to a data pointer \a data.
 *  If \a data is not needed, then it can be set to NULL.
 *  The processing of the opened rot table is stopped
 *  when cfunc() returns 0.
 * \internal
 *
 * \return always RIG_OK.
 */

int foreach_opened_rot(int (*cfunc)(ROT *, rig_ptr_t), rig_ptr_t data)
{
	struct opened_rot_l *p;

	for (p=opened_rot_list; p; p=p->next) {
		if ((*cfunc)(p->rot,data) == 0)
			return RIG_OK;
	}
	return RIG_OK;
}

/**
 * \brief allocate a new #ROT handle
 * \param rot_model	The rot model for this new handle
 *
 * Allocates a new #ROT handle and initializes the associated data
 * for \a rot_model.
 *
 * \return a pointer to the #ROT handle otherwise NULL if memory allocation
 * failed or \a rot_model is unknown (e.g. backend autoload failed).
 *
 * \sa rot_cleanup(), rot_open()
 */

ROT * HAMLIB_API rot_init(rot_model_t rot_model)
{
	ROT *rot;
	const struct rot_caps *caps;
	struct rot_state *rs;
	int retcode;

	rot_debug(RIG_DEBUG_VERBOSE,"rot:rot_init called \n");

	rot_check_backend(rot_model);

	caps = rot_get_caps(rot_model);
	if (!caps)
		return NULL;

	/*
	 * okay, we've found it. Allocate some memory and set it to zeros,
	 * and especially the initialize the callbacks
	 */
	rot = calloc(1, sizeof(ROT));
	if (rot == NULL) {
		/*
		 * FIXME: how can the caller know it's a memory shortage,
		 * 		  and not "rot not found" ?
		 */
		return NULL;
	}

        /* caps is const, so we need to tell compiler
           that we now what we are doing */
	rot->caps = (struct rot_caps *) caps;

	/*
	 * populate the rot->state
	 * TODO: read the Preferences here!
	 */

	rs = &rot->state;

	rs->comm_state = 0;
	rs->rotport.type.rig = caps->port_type; /* default from caps */

	rs->rotport.write_delay = caps->write_delay;
	rs->rotport.post_write_delay = caps->post_write_delay;
	rs->rotport.timeout = caps->timeout;
	rs->rotport.retry = caps->retry;

	switch (caps->port_type) {
	case RIG_PORT_SERIAL:
	strncpy(rs->rotport.pathname, DEFAULT_SERIAL_PORT, FILPATHLEN - 1);
	rs->rotport.parm.serial.rate = caps->serial_rate_max;	/* fastest ! */
	rs->rotport.parm.serial.data_bits = caps->serial_data_bits;
	rs->rotport.parm.serial.stop_bits = caps->serial_stop_bits;
	rs->rotport.parm.serial.parity = caps->serial_parity;
	rs->rotport.parm.serial.handshake = caps->serial_handshake;
	break;

	case RIG_PORT_PARALLEL:
	strncpy(rs->rotport.pathname, DEFAULT_PARALLEL_PORT, FILPATHLEN - 1);
	break;

	case RIG_PORT_NETWORK:
	case RIG_PORT_UDP_NETWORK:
	strncpy(rs->rotport.pathname, "127.0.0.1:4533", FILPATHLEN - 1);
	break;

	default:
	strncpy(rs->rotport.pathname, "", FILPATHLEN - 1);
	}

	rs->min_el = caps->min_el;
	rs->max_el = caps->max_el;
	rs->min_az = caps->min_az;
	rs->max_az = caps->max_az;

	rs->rotport.fd = -1;

	/*
	 * let the backend a chance to setup his private data
	 * This must be done only once defaults are setup,
	 * so the backend init can override rot_state.
	 */
	if (caps->rot_init != NULL) {
		retcode = caps->rot_init(rot);
		if (retcode != RIG_OK) {
			rot_debug(RIG_DEBUG_VERBOSE,"rot:backend_init failed!\n");
			/* cleanup and exit */
			free(rot);
			return NULL;
		}
	}

	return rot;
}

/**
 * \brief open the communication to the rot
 * \param rot	The #ROT handle of the rotator to be opened
 *
 * Opens communication to a rotator which \a ROT handle has been passed
 * by argument.
 *
 * \return RIG_OK if the operation has been sucessful, otherwise
 * a negative value if an error occured (in which case, cause is
 * set appropriately).
 *
 * \retval RIG_EINVAL	\a rot is NULL or unconsistent.
 * \retval RIG_ENIMPL	port type communication is not implemented yet.
 *
 * \sa rot_init(), rot_close()
 */

int HAMLIB_API rot_open(ROT *rot)
{
	const struct rot_caps *caps;
	struct rot_state *rs;
	int status;

	rot_debug(RIG_DEBUG_VERBOSE,"rot:rot_open called \n");

	if (!rot || !rot->caps)
		return -RIG_EINVAL;

	caps = rot->caps;
	rs = &rot->state;

	if (rs->comm_state)
		return -RIG_EINVAL;

	rs->rotport.fd = -1;

	switch(rs->rotport.type.rig) {
	case RIG_PORT_SERIAL:
		status = serial_open(&rs->rotport);
		if (status != 0)
				return status;
		break;

	case RIG_PORT_PARALLEL:
		status = par_open(&rs->rotport);
		if (status < 0)
			return status;
		break;

	case RIG_PORT_DEVICE:
		status = open(rs->rotport.pathname, O_RDWR, 0);
		if (status < 0)
			return -RIG_EIO;
		rs->rotport.fd = status;
		break;

	case RIG_PORT_USB:
		status = usb_port_open(&rs->rotport);
		if (status < 0)
			return status;
		break;

	case RIG_PORT_NONE:
	case RIG_PORT_RPC:
			break;	/* ez :) */

	case RIG_PORT_NETWORK:
	case RIG_PORT_UDP_NETWORK:
        /* FIXME: default port */
		status = network_open(&rs->rotport, 4533);
		if (status < 0)
			return status;
		break;

	default:
		return -RIG_EINVAL;
	}


	add_opened_rot(rot);

	rs->comm_state = 1;

	/*
	 * Maybe the backend has something to initialize
	 * In case of failure, just close down and report error code.
	 */
	if (caps->rot_open != NULL) {
		status = caps->rot_open(rot);
		if (status != RIG_OK) {
			return status;
		}
	}

	return RIG_OK;
}

/**
 * \brief close the communication to the rot
 * \param rot	The #ROT handle of the rotator to be closed
 *
 * Closes communication to a rotator which \a ROT handle has been passed
 * by argument that was previously open with rot_open().
 *
 * \return RIG_OK if the operation has been sucessful, otherwise
 * a negative value if an error occured (in which case, cause is
 * set appropriately).
 *
 * \sa rot_cleanup(), rot_open()
 */

int HAMLIB_API rot_close(ROT *rot)
{
	const struct rot_caps *caps;
	struct rot_state *rs;

	rot_debug(RIG_DEBUG_VERBOSE,"rot:rot_close called \n");

	if (!rot || !rot->caps)
		return -RIG_EINVAL;

	caps = rot->caps;
	rs = &rot->state;

	if (!rs->comm_state)
		return -RIG_EINVAL;

	/*
	 * Let the backend say 73s to the rot.
	 * and ignore the return code.
	 */
	if (caps->rot_close)
		caps->rot_close(rot);


	if (rs->rotport.fd != -1) {
		switch(rs->rotport.type.rig) {
		case RIG_PORT_SERIAL:
			ser_close(&rs->rotport);
			break;
		case RIG_PORT_PARALLEL:
			par_close(&rs->rotport);
			break;
		case RIG_PORT_USB:
			usb_port_close(&rs->rotport);
			break;
		case RIG_PORT_NETWORK:
		case RIG_PORT_UDP_NETWORK:
			network_close(&rs->rotport);
			break;
		default:
			close(rs->rotport.fd);
		}
		rs->rotport.fd = -1;
	}

	remove_opened_rot(rot);

	rs->comm_state = 0;

	return RIG_OK;
}

/**
 * \brief release a rot handle and free associated memory
 * \param rot	The #ROT handle of the radio to be closed
 *
 * Releases a rot struct which port has eventualy been closed already
 * with rot_close().
 *
 * \return RIG_OK if the operation has been sucessful, otherwise
 * a negative value if an error occured (in which case, cause is
 * set appropriately).
 *
 * \sa rot_init(), rot_close()
 */

int HAMLIB_API rot_cleanup(ROT *rot)
{
	rot_debug(RIG_DEBUG_VERBOSE,"rot:rot_cleanup called \n");

	if (!rot || !rot->caps)
		return -RIG_EINVAL;

	/*
	 * check if they forgot to close the rot
	 */
	if (rot->state.comm_state)
		rot_close(rot);

	/*
	 * basically free up the priv struct
	 */
	if (rot->caps->rot_cleanup)
		rot->caps->rot_cleanup(rot);

	free(rot);

	return RIG_OK;
}

/**
 * \brief set the azimuth and elevation of the rotator
 * \param rot	The rot handle
 * \param azimuth	The azimuth to set to
 * \param elevation	The elevation to set to
 *
 * Sets the azimuth and elevation of the rotator.
 *
 * \return RIG_OK if the operation has been sucessful, otherwise
 * a negative value if an error occured (in which case, cause is
 * set appropriately).
 *
 * \sa rot_get_position()
 */

int HAMLIB_API rot_set_position (ROT *rot, azimuth_t azimuth, elevation_t elevation)
{
	const struct rot_caps *caps;
	const struct rot_state *rs;

	if (CHECK_ROT_ARG(rot))
		return -RIG_EINVAL;

	caps = rot->caps;
	rs = &rot->state;

	if (azimuth < rs->min_az || azimuth > rs->max_az ||
			elevation < rs->min_el || elevation > rs->max_el)
		return -RIG_EINVAL;

	if (caps->set_position == NULL)
		return -RIG_ENAVAIL;

	return caps->set_position(rot, azimuth, elevation);
}

/**
 * \brief get the azimuth and elevation of the rotator
 * \param rot	The rot handle
 * \param azimuth	The location where to store the current azimuth
 * \param elevation	The location where to store the current elevation
 *
 *  Retrieves the current azimuth and elevation of the rotator.
 *
 * \return RIG_OK if the operation has been sucessful, otherwise
 * a negative value if an error occured (in which case, cause is
 * set appropriately).
 *
 * \sa rot_set_position()
 */

int HAMLIB_API rot_get_position (ROT *rot, azimuth_t *azimuth, elevation_t *elevation)
{
	const struct rot_caps *caps;

	if (CHECK_ROT_ARG(rot) || !azimuth || !elevation)
		return -RIG_EINVAL;

	caps = rot->caps;

	if (caps->get_position == NULL)
		return -RIG_ENAVAIL;

	return caps->get_position(rot, azimuth, elevation);
}

/**
 * \brief park the antenna
 * \param rot	The rot handle
 *
 *  Park the antenna.
 *
 * \return RIG_OK if the operation has been sucessful, otherwise
 * a negative value if an error occured (in which case, cause is
 * set appropriately).
 *
 */

int HAMLIB_API rot_park (ROT *rot)
{
	const struct rot_caps *caps;

	if (CHECK_ROT_ARG(rot))
		return -RIG_EINVAL;

	caps = rot->caps;

	if (caps->park == NULL)
		return -RIG_ENAVAIL;

	return caps->park(rot);
}

/**
 * \brief stop the rotator
 * \param rot	The rot handle
 *
 *  Stop the rotator.
 *
 * \return RIG_OK if the operation has been sucessful, otherwise
 * a negative value if an error occured (in which case, cause is
 * set appropriately).
 *
 */

int HAMLIB_API rot_stop (ROT *rot)
{
	const struct rot_caps *caps;

	if (CHECK_ROT_ARG(rot))
		return -RIG_EINVAL;

	caps = rot->caps;

	if (caps->stop == NULL)
		return -RIG_ENAVAIL;

	return caps->stop(rot);
}

/**
 * \brief reset the rotator
 * \param rot	The rot handle
 * \param reset The reset operation to perform
 *
 *  Resets the rotator.
 *
 * \return RIG_OK if the operation has been sucessful, otherwise
 * a negative value if an error occured (in which case, cause is
 * set appropriately).
 *
 */

int HAMLIB_API rot_reset (ROT *rot, rot_reset_t reset)
{
	const struct rot_caps *caps;

	if (CHECK_ROT_ARG(rot))
		return -RIG_EINVAL;

	caps = rot->caps;

	if (caps->reset == NULL)
		return -RIG_ENAVAIL;

	return caps->reset(rot, reset);
}

/**
 * \brief move the rotator in the specified direction
 * \param rot   The rot handle
 * \param direction   Direction of movement
 * \param speed   Speed of movement
 *
 * Move the rotator in the specified direction. The speed is a value
 * between 1 and 100.
 */
int HAMLIB_API rot_move (ROT *rot, int direction, int speed)
{
        const struct rot_caps *caps;

        if (CHECK_ROT_ARG(rot))
            return -RIG_EINVAL;

        caps = rot->caps;

        if (caps->move == NULL)
            return -RIG_ENAVAIL;

        return caps->move(rot, direction, speed);
}

/**
 * \brief get general information from the rotator
 * \param rot	The rot handle
 *
 * Retrieves some general information from the rotator.
 * This can include firmware revision, exact model name, or just nothing.
 *
 * \return a pointer to static memory containing the ASCIIZ string
 * if the operation has been sucessful, otherwise NULL if an error occured
 * or get_info not part of capabilities.
 */
const char* HAMLIB_API rot_get_info(ROT *rot)
{
	if (CHECK_ROT_ARG(rot))
		return NULL;

	if (rot->caps->get_info == NULL)
		return NULL;

	return rot->caps->get_info(rot);
}

/*! @} */