| .. |
|
amp_conf.c
|
Add needed new includes in src/*.c
|
2025-07-10 09:54:03 -04:00 |
|
amp_conf.h
|
Change token_t to hamlib_token_t to avoid collsions with libbsm and others
|
2024-01-21 23:11:55 -06:00 |
|
amp_reg.c
|
Progress on Expert ampctl
|
2023-03-28 17:23:54 -05:00 |
|
amp_settings.c
|
Add needed new includes in src/*.c
|
2025-07-10 09:54:03 -04:00 |
|
amplifier.c
|
Add needed new includes in src/*.c
|
2025-07-10 09:54:03 -04:00 |
|
Android.mk
|
Change all to remove HAVE_CONFIG dependency and include <hamlib/config.h> by default
|
2022-02-04 07:41:36 -06:00 |
|
band_changed.c
|
Make rig_band_changed HAMLIB_API
|
2024-01-14 23:06:41 -06:00 |
|
band_changed.c.example
|
Update band_change.c.example
|
2024-05-23 07:18:09 -05:00 |
|
cache.c
|
Add needed new includes in src/*.c
|
2025-07-10 09:54:03 -04:00 |
|
cache.h
|
Move more rig_cache infrastructure to cache.[ch]
|
2025-06-03 12:07:27 -04:00 |
|
cal.c
|
Astyle cal.c
|
2024-02-15 09:25:27 -06:00 |
|
cal.h
|
Add new levels: RFPOWER_METER, COMP_METER, VD_METER and ID_METER, supported at least by most of recent Icom rigs. Add level NOTCHF_RAW for manual notch frequency without specified unit for Icom rigs. Add level MONITOR_GAIN. Add functions DUAL_WATCH and DIVERSITY, supported now by K3/K3S. Fix VOXDELAY level commands for many Icom rigs. Add MONITOR_GAIN level for Icom rigs. Fix and add many K3 commands and add specific rig models for K3S, KX2 and KX3 -- they are very similar to K3, but have slight differences. Extend dump_caps output for rigctl: add complete details of ext levels and frequency ranges. Tests have been performed on IC-7000, IC-756ProIII, IC-7300, IC-7600 and K3.
|
2019-05-30 09:37:49 +03:00 |
|
cm108.c
|
Fix sign of return values Doxygen comments
|
2025-06-07 10:54:34 +02:00 |
|
cm108.h
|
Reformatted src directory
|
2017-08-09 06:14:31 -05:00 |
|
conf.c
|
Add needed new includes in src/*.c
|
2025-07-10 09:54:03 -04:00 |
|
debug.c
|
Revert "Fix debug messages shown even from disabled levels"
|
2025-07-06 14:58:41 +02:00 |
|
event.c
|
Add needed new includes in src/*.c
|
2025-07-10 09:54:03 -04:00 |
|
event.h
|
Initial implementation of: reader thread for async handling of rig data, UDP multicast publisher routine and rig state poll thread routine. The reader thread can correctly handle asynchronous data, such as transceive or spectrum data. Work in progress: multi-platform code for I/O routines still missing and the poll routine is not yet in use. Tested briefly on an IC-7300 so far.
|
2021-11-28 20:52:29 +02:00 |
|
ext.c
|
astyle files in preparation for release 4.6
|
2024-11-06 08:07:34 -06:00 |
|
extamp.c
|
Fix sign of return values Doxygen comments
|
2025-06-07 10:54:34 +02:00 |
|
fifo.c
|
astyle files
|
2023-12-16 11:37:58 -06:00 |
|
fifo.h
|
Add fifo peek
|
2023-07-17 10:26:47 -05:00 |
|
gpio.c
|
Revert "Refactoring GPIO push-to-talk logic to use libgpiod rather than the d…"
|
2024-05-12 14:37:23 -05:00 |
|
gpio.h
|
Add GPIO and GPION options for DCD.
|
2018-03-29 23:55:25 +02:00 |
|
hamlibdatetime.h.in
|
Move hamlibdatetime.h generation to src directory
|
2021-03-19 23:14:13 -05:00 |
|
idx_builtin.h
|
Add RIG_LEVEL_USB_AF_INPUT
|
2023-10-18 16:47:29 -05:00 |
|
iofunc.c
|
Improve error message when windows serial port is already in use
|
2024-12-28 15:59:43 -06:00 |
|
iofunc.h
|
Add flushing of rig port, including async data pipes, after \send_raw and \send_cmd to drain any extra rig responses
|
2023-05-13 00:04:37 +03:00 |
|
locator.c
|
Revert 17b404a6c7
|
2025-06-14 11:42:45 -05:00 |
|
Makefile.am
|
Remove the executable bit from data files
|
2025-07-06 19:45:43 +02:00 |
|
mem.c
|
Add needed new includes in src/*.c
|
2025-07-10 09:54:03 -04:00 |
|
microham.c
|
Fix typos
|
2024-12-01 21:59:11 +01:00 |
|
microham.h
|
Add uh_wkey_close to microham.h
|
2020-01-13 07:27:41 -06:00 |
|
misc.c
|
Add needed new includes in src/*.c
|
2025-07-10 09:54:03 -04:00 |
|
misc.h
|
Check off a few more cppcheck carps.
|
2025-06-07 10:46:31 -04:00 |
|
multicast.c
|
Add needed new includes in src/*.c
|
2025-07-10 09:54:03 -04:00 |
|
mutex.h
|
Move MUTEX macros to mutex.h to allow inclusion in other code
|
2024-06-18 11:38:56 -05:00 |
|
network.c
|
Add needed new includes in src/*.c
|
2025-07-10 09:54:03 -04:00 |
|
network.h
|
Add network_flush2 to support async messages from Flex TCP
|
2024-05-29 06:13:59 -05:00 |
|
neverused.c
|
Enable --show-conf for ampctl and ampctld
|
2023-03-18 10:25:36 +01:00 |
|
par_nt.h
|
Formatted src/ to final coding guidelines
|
2017-10-04 21:32:08 -05:00 |
|
parallel.c
|
Fix mingw compile warnings
|
2023-05-07 17:27:31 -05:00 |
|
parallel.h
|
Add --disable-parallel configure option
|
2022-12-09 23:35:03 -06:00 |
|
register.c
|
Add the rig_backend_list to guohetec
|
2025-06-25 18:11:30 +08:00 |
|
register.h
|
Add config.h to include/hamlib so HAVE_PTHREAD is available if needed
|
2022-02-03 22:31:42 -06:00 |
|
rig.c
|
Add needed new includes in src/*.c
|
2025-07-10 09:54:03 -04:00 |
|
rot_conf.c
|
Add needed new includes in src/*.c
|
2025-07-10 09:54:03 -04:00 |
|
rot_conf.h
|
Change token_t to hamlib_token_t to avoid collsions with libbsm and others
|
2024-01-21 23:11:55 -06:00 |
|
rot_ext.c
|
Fix sign of return values Doxygen comments
|
2025-06-07 10:54:34 +02:00 |
|
rot_reg.c
|
astyle files in preparation for release 4.6
|
2024-11-06 08:07:34 -06:00 |
|
rot_settings.c
|
Add needed new includes in src/*.c
|
2025-07-10 09:54:03 -04:00 |
|
rotator.c
|
Add needed new includes in src/*.c
|
2025-07-10 09:54:03 -04:00 |
|
serial.c
|
Add needed new includes in src/*.c
|
2025-07-10 09:54:03 -04:00 |
|
serial.h
|
Fix cppcheck warnings
|
2023-10-11 23:22:42 -05:00 |
|
serial_cfg_params.h
|
Move serial_cfg_params to common inlude fill as it is applicate to all serial devices
|
2023-07-20 11:12:24 -05:00 |
|
settings.c
|
Add needed new includes in src/*.c
|
2025-07-10 09:54:03 -04:00 |
|
sleep.c
|
Fix typos
|
2024-12-01 21:59:11 +01:00 |
|
sleep.h
|
Fix MSVC compile by removing unistd.h and defining our own rig_useconds_t
|
2020-06-13 17:40:47 -05:00 |
|
snapshot_data.c
|
Add needed new includes in src/*.c
|
2025-07-10 09:54:03 -04:00 |
|
snapshot_data.h
|
Add more detailed rig communication status to rig_state and multicast state data packets. Handle SIGINT and SIGTERM in a consistent way in both rigctl and rigctld.
|
2023-11-06 00:42:02 +02:00 |
|
sprintflst.c
|
Another reversion
|
2025-06-25 10:53:50 -04:00 |
|
sprintflst.h
|
Add help to N command in rigctl
|
2024-10-07 12:19:03 -05:00 |
|
token.h
|
Improve Flex error message
|
2024-07-02 11:58:28 -05:00 |
|
tones.c
|
Add needed new includes in src/*.c
|
2025-07-10 09:54:03 -04:00 |
|
tones.h
|
Clean up mingw compiler warning for tones.h
|
2021-04-29 17:16:51 -05:00 |
|
usb_port.c
|
Fix usb_port.c to use new libusb format for pid:vid
|
2024-03-05 15:57:10 -06:00 |
|
usb_port.h
|
Update LGPL header in src source files.
|
2011-08-22 21:38:37 -05:00 |
|
version_dll.rc
|
Remove the executable bit from data files
|
2025-07-06 19:45:43 +02:00 |
