mirror of
https://github.com/la5nta/pat
synced 2026-08-13 17:46:54 -04:00
d716296b52
This eliminates the need for Linux's AX25 stack when using Direwolf or AGWPE TNCs. It makes AGWPE the default AX.25 engine if the build does not include Linux AX.25 support. Direwolf >= v1.6 is recommended (< v1.2 is unsupported). Closes #367
55 lines
2.4 KiB
Go
55 lines
2.4 KiB
Go
// Copyright 2016 Martin Hebnes Pedersen (LA5NTA). All rights reserved.
|
|
// Use of this source code is governed by the MIT-license that can be
|
|
// found in the LICENSE file.
|
|
|
|
package main
|
|
|
|
var (
|
|
UsageConnect = `'alias' or 'transport://[host][/digi]/targetcall[?params...]'
|
|
|
|
transport:
|
|
telnet: TCP/IP
|
|
ardop: ARDOP TNC
|
|
pactor: SCS PTC modems
|
|
varahf: VARA HF TNC
|
|
varafm: VARA FM TNC
|
|
ax25: AX.25 (Default - uses engine specified in config)
|
|
ax25+agwpe: AX.25 (AGWPE/Direwolf)
|
|
ax25+linux: AX.25 (Linux kernel)
|
|
ax25+serial-tnc: AX.25 (Serial TNC)
|
|
|
|
host:
|
|
Used to address the host interface (TNC/modem), _not_ to be confused with the connection PATH.
|
|
Format: [user[:pass]@]host[:port]
|
|
|
|
telnet: [user:pass]@host:port
|
|
ax25+linux: (optional) host=axport
|
|
pactor: (optional) serial device (e.g. COM1 or /dev/ttyUSB0)
|
|
|
|
path:
|
|
The last element of the path is the target station's callsign. If the path has
|
|
multiple hops (e.g. AX.25), they are separated by '/'.
|
|
|
|
params:
|
|
?freq= Sets QSY frequency (ardop and ax25 only)
|
|
?host= Overrides the host part of the path. Useful for serial-tnc to specify e.g. /dev/ttyS0.
|
|
`
|
|
ExampleConnect = `
|
|
connect telnet (alias) Connect to one of the Winlink Common Message Servers via tcp.
|
|
connect ax25:///LA1B-10 Connect to the RMS Gateway LA1B-10 using AX.25 engine as per configuration.
|
|
connect ax25+linux://tmd710/LA1B-10 Connect to LA1B-10 using Linux kernel's AX.25 stack on axport 'tmd710'.
|
|
connect ax25:///LA1B/LA5NTA Peer-to-peer connection with LA5NTA via LA1B digipeater.
|
|
connect ardop:///LA3F Connect to the RMS HF Gateway LA3F using ARDOP on the default tcp address and port.
|
|
connect ardop:///LA3F?freq=5350 Same as above, but set dial frequency of the radio using rigcontrol.
|
|
connect pactor:///LA3F Connect to RMS HF Gateway LA3F using PACTOR.
|
|
connect varahf:///LA1B Connect to RMS HF Gateway LA1B using VARA HF TNC.
|
|
connect varafm:///LA5NTA Connect to LA5NTA using VARA FM TNC.
|
|
`
|
|
)
|
|
|
|
var ExamplePosition = `
|
|
position -c "QRV 145.500MHz" Send position and comment with coordinates retrieved from GPSd.
|
|
position --latlon 59.123,005.123 Send position 59.123N 005.123E.
|
|
position --latlon 40.704,-73.945 Send position 40.704N 073.945W.
|
|
position --latlon -10.123,-60.123 Send position 10.123S 060.123W.
|
|
`
|