From 26c9af9b13b839fe9c1b70abe130309906f66b3b Mon Sep 17 00:00:00 2001 From: KM4ACK Date: Mon, 17 Feb 2020 05:34:59 -0600 Subject: [PATCH 1/2] update --- test | 202 ++++++++++++++--------------------------------------------- 1 file changed, 48 insertions(+), 154 deletions(-) diff --git a/test b/test index 1bd1cf1..b38276f 100644 --- a/test +++ b/test @@ -1,172 +1,66 @@ -#!/bin/bash +#!/bin bash -#test script to figure out why rig control isn't starting +#install/configure real time clock +#20190203 km4ack +#script based on directions from the following web site +#https://thepihut.com/blogs/raspberry-pi-tutorials/17209332-adding-a-real-time-clock-to-your-raspberry-pi -source $HOME/patmenu/config +clear;echo;echo -ARDOPLIST=$HOME/patmenu/ardop-list/ +IC2ACTIVE=$(ls /dev/*i2c*) -touch $LOG - -DATE=$(date) - -STARTPID=$(pidof rigctld) - -STARTRIG () { -#start rigctld if not already -PIDCTL=$(pidof rigctld) -WHO=$(whoami) - if [ -z "$PIDCTL" ] - then - CONTROL=$(echo $RIG | sed 's/rigctl/rigctld/') - #CONTROL=$(cat $HOME/patmenu/config | grep '^RIG="' | sed 's/RIG="//' | sed 's/"//' | sed 's/rigctl/rigctld/') - $CONTROL & - sudo systemctl restart pat@$WHO - fi -} -STARTRIG -if [ -z "$PIDCTL" ] +if [ $IC2ACTIVE = "/dev/i2c-1" ] then -STARTRIG +echo "IC2 is active" +else +clear;echo;echo +#echo "Please enable IC2 interface in the " +#echo "Raspberry Pi Configuration and try again" +sudo sed -i 's/#dtparam=i2c_arm=on/dtparam=i2c_arm=on/' /boot/config.txt fi -echo "This is rig from config file-"$RIG -echo "PID of rigctld at start-"$STARTPID -echo "I am-"$WHO -echo "Rig control command to start rigctld-"$CONTROL -echo "PID of rigctld at end-"$PIDCTL exit 0 -SETRIG () { +clear;echo;echo +date +echo +read -p "Is the time above correct? y/n " ANS -#Set USB Mode -RIGUSB=$RIG" M $MODEHF 0" - -#check rig is in USB -MODE=$($RIG m | grep MODEHF) - -sleep 1 - - MODECHECK() { - #check rig is in correct mode - MODE=$($RIG m | grep $MODEHF) - } - -sleep 1 - - if [ -z $MODE ] - then - $RIGUSB - MODECHECK - fi - -} - -SETRIG - -#Directions Function -directions () { -echo "The script needs two arguments to run." -echo "It needs the distance that you want to try to connect" -echo "and it needs the band you wish to use" -echo "Bands available are 20, 30, 40, & 80" -echo "The first argument is the distance" -echo "and the second is the band. So to try all 40M" -echo "stations in a 300km radius, you would enter" -echo "autopat 300 40" -exit 0 -} - -#check if distance is empty and give direction -if [ -z "$1" ] -then -directions -fi - -#check if band is empty and give direction -if [ -z "$2" ] -then -directions -fi - -#Check for min distance -if [ -z "$3" ] -then -MIN=0 +if [ $ANS = 'y' ] || [ $ANS = 'Y' ]; then +echo "Time OK" else -MIN=$3 -fi - -#take $2 as band to use -if [ $2 = "20" ] -then -FILE=$ARDOPLIST"20mardoplist.txt" -elif [ $2 = "30" ] -then -FILE=$ARDOPLIST"30mardoplist.txt" -elif [ $2 = "40" ] -then -FILE=$ARDOPLIST"40mardoplist.txt" -elif [ $2 = "80" ] -then -FILE=$ARDOPLIST"80mardoplist.txt" -fi - -#Verify we have a list to work with -test -f $FILE -FILERESULT=$(echo $?) -if [ $FILERESULT = "1" ] -then -echo "FILE DOESN'T EXIST." -#Ask user to install findardop?? +echo; echo "Please connect to the internet" +echo "or GPS to get correct time"; echo exit 0 fi -#start piardopc -$ARDOP & -sleep 10 +sudo i2cdetect -y 1 -#Pat Connection Function -connect () { -pat connect $CALL -#Check if connection was successful -RESULTS=$(echo $?) -if [ $RESULTS = "0" ] -then -echo "A connection was made" -echo $DATE" "$Call" Success with autopat" >> $LOG -sudo killall piardopc -exit 0 +echo;echo +read -p "Do you see 68 in the info listed above? y/n " ANS1 +echo +if [ $ANS1 = 'y' ] || [ $ANS1 = 'Y' ]; then +sudo modprobe rtc-ds1307 +echo "ds1307 0x68" | sudo tee -a /sys/class/i2c-adapter/i2c-1/new_device +sudo hwclock -w +echo rtc-ds1307 | sudo tee -a /etc/modules + +sudo sed -i 's/exit\ 0//' /etc/rc.local +echo "echo ds1307 0x68 > /sys/class/i2c-adapter/i2c-1/new_device" | sudo tee -a /etc/rc.local > /dev/null 2>&1 +echo "sudo hwclock -s" | sudo tee -a /etc/rc.local > /dev/null 2>&1 +echo "date" | sudo tee -a /etc/rc.local > /dev/null 2>&1 +echo "exit 0" | sudo tee -a /etc/rc.local > /dev/null 2>&1 +echo +echo "The real time clock has been installed & configured" +echo "It is advised you check to make sure everything" +echo "is working correctly. See the video for instructions" +echo "Enjoy! 73, de KM4ACK" +else +echo "Please check that the real time" +echo "clock is installed correctly" +echo "and try again" fi -} - -#create temp dir & manipulate file -mkdir -p $HOME/tempardop/ -#cat file, remove first few lines, remove blanks > NEWFILE NAME -cat $FILE | tail -n +5 | grep '[^[:blank:]]' > $HOME/tempardop/tempardop.txt - -#pad with zeros -while read LINE - do DISTANCE=$(echo $LINE | awk '{ print $3 }' | sed -e :a -e 's/^.\{1,4\}$/0&/;ta') - CALL=$(echo $LINE | awk '{ print $11 }') - echo $DISTANCE" "$CALL >> $HOME/tempardop/tempardop1.txt -done < $HOME/tempardop/tempardop.txt - -cat $HOME/tempardop/tempardop1.txt | sort >> $HOME/tempardop/sorted.txt - -echo "Will Attempt to Connect to This Station" -#loop through file and find needed station info -while read LINE - do DISTANCE=$(echo $LINE | awk '{ print $1 }') - CALL=$(echo $LINE | awk '{ print $2 }') - if [ $DISTANCE -lt "$1" ] && [ $DISTANCE -gt "$MIN" ] - then - echo "Distance="$DISTANCE " Call="$CALL - #call the connect funtion - connect - fi -done < $HOME/tempardop/sorted.txt -#remove temp directory & files -rm -rf $HOME/tempardop + + \ No newline at end of file From 68729f81fea9f1ba612b656d99d66429d4203999 Mon Sep 17 00:00:00 2001 From: KM4ACK Date: Mon, 17 Feb 2020 05:46:24 -0600 Subject: [PATCH 2/2] remove blanks from list --- wificonnect | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/wificonnect b/wificonnect index 6b97af3..ed766a8 100644 --- a/wificonnect +++ b/wificonnect @@ -25,7 +25,7 @@ echo echo echo "These hotspots are available" echo -iwlist wlan0 scan | grep ESSID | sed 's/ESSID://g;s/"//g;s/^ //g' +iwlist wlan0 scan | grep ESSID | sed 's/ESSID://g;s/"//g;s/^ //g' | sed '/^$/d' #ask user about hotspots echo echo "1 to refresh the list, 2 to exit or"