wavelog/install/config/config.php

<?php
defined('BASEPATH') OR exit('No direct script access allowed');


/*
|--------------------------------------------------------------------------
| Install Options
|--------------------------------------------------------------------------
|
|	'app_name'		Name of the App 'Wavelog'
|	'directory'		directory where wavelog is installed eg "logger"
|	'callbook'		Selects which Callbook lookup to use defaults "hamqth" but also supports: "qrz", "qrzcq", "qrzru" and "qrzcall"
*/

$config['app_name'] = 'Wavelog';
$config['directory'] = '%directory%';

/*
|--------------------------------------------------------------------------
| Callbook Settings
|--------------------------------------------------------------------------
| Options are hamqth, qrz, qrzcq, qrzru or qrzcall
| For a single callbook configure just one value as string. Example:
| $config['callbook'] = 'hamqth';
| This can also be set to an array of callbooks to search sequentially until a match is found. Example:
| $config['callbook'] = ['qrz', 'hamqth'];
 */
$config['callbook'] = '%callbook%';

$config['datadir'] = null; // default to install directory

/*
|--------------------------------------------------------------------------
| Logbook Options
|--------------------------------------------------------------------------
|
| 	'table_name'	SQL table where log can be found
|	'locator'	    Default locator used to calculate bearings/distance
|	'display_freq'	Show or Hide frequency info
*/

$config['table_name'] = 'TABLE_HRD_CONTACTS_V01';
$config['locator'] = '%baselocator%';
$config['display_freq'] = true;

/*
|--------------------------------------------------------------------------
| QRZ Login Options
|--------------------------------------------------------------------------
|
| 	'qrz_username'	QRZ.com user login (callsign, not email)
|	'qrz_password'	QRZ.com user password
|	'use_fullname'  Get full names from QRZ, may not be GDPR compliant
*/

$config['qrz_username'] = '%qrz_username%';
$config['qrz_password'] = '%qrz_password%';
$config['use_fullname'] = false;

/*
|--------------------------------------------------------------------------
| HamQTH Login Options
|--------------------------------------------------------------------------
|
| 	'hamqth_username'	HamQTH user login
|	'hamqth_password'	HamQTH user password
*/
$config['hamqth_username'] = '%hamqth_username%';
$config['hamqth_password'] = '%hamqth_password%';

/*
|--------------------------------------------------------------------------
| QRZcq Login Options
|--------------------------------------------------------------------------
|
| 	'qrzcq_username'	QRZcq.com user login
|	'qrzcq_password'	QRZcq.com user password
*/
$config['qrzcq_username'] = '%qrzcq_username%';
$config['qrzcq_password'] = '%qrzcq_password%';

/*
|--------------------------------------------------------------------------
| QRZ.ru Login Options
|--------------------------------------------------------------------------
|
| 	'qrzru_username'	QRZ.ru user login
|	'qrzru_password'	QRZ.ru user password
*/
$config['qrzru_username'] = '%qrzru_username%';
$config['qrzru_password'] = '%qrzru_password%';

/*
|--------------------------------------------------------------------------
| QRZCALL.EU Login Options
|--------------------------------------------------------------------------
|
| 	'qrzcall_token'	QRZCALL.EU Personal Access Token (starts with "pat_")
|
| Generate the token at https://qrzcall.eu/ → My Profile → Account →
| API Tokens. Requires a Data or Extra subscription. Tokens are
| revocable individually.
*/
$config['qrzcall_token'] = '%qrzcall_token%';

/*
|--------------------------------------------------------------------------
| Authentication
|--------------------------------------------------------------------------
|
| 'use_auth'	False turns all authentication off, best used when setting up
| 'auth_table'	MySQL Database Table defaults "users"
| 'auth_mode'	Minimum user level required 0 = anonymous, 1 = viewer,
|				2 = editor, 3 = api user, 99 = owner
| 'auth_level[]'	Defines level titles
*/

$config['use_auth'] = true;
$config['auth_table'] = 'users';
$config['auth_mode'] = '3';

$config['auth_level'][3] = 'Operator';
$config['auth_level'][99] = 'Administrator';

/*
|--------------------------------------------------------------------------
| Third-Party Authentication (SSO)
|--------------------------------------------------------------------------
|
| Enable SSO support via a trusted HTTP header containing a JWT access token.
| If enabled, a sso.php config file is required (see sso.sample.php).
|
| Documentation: https://docs.wavelog.org/admin-guide/configuration/thirdparty-authentication/
*/

$config['auth_header_enable'] = false;

/*
|--------------------------------------------------------------------------
| Base Site URL
|--------------------------------------------------------------------------
|
| URL to your CodeIgniter root. Typically this will be your base URL,
| WITH a trailing slash:
|
|	http://example.com/
|
| WARNING: You MUST set this value!
|
| If it is not set, then CodeIgniter will try guess the protocol and path
| your installation, but due to security concerns the hostname will be set
| to $_SERVER['SERVER_ADDR'] if available, or localhost otherwise.
| The auto-detection mechanism exists only for convenience during
| development and MUST NOT be used in production!
|
| If you need to allow multiple domains, remember that this file is still
| a PHP script and you can easily do that on your own.
|
*/
$config['base_url']	= '%websiteurl%';

/*
|--------------------------------------------------------------------------
| Index File
|--------------------------------------------------------------------------
|
| Typically this will be your index.php file, unless you've renamed it to
| something else. If you are using mod_rewrite to remove the page set this
| variable so that it is blank.
|
*/
$config['index_page'] = 'index.php';

/*
|--------------------------------------------------------------------------
| URI PROTOCOL
|--------------------------------------------------------------------------
|
| This item determines which server global should be used to retrieve the
| URI string.  The default setting of 'REQUEST_URI' works for most servers.
| If your links do not seem to work, try one of the other delicious flavors:
|
| 'REQUEST_URI'    Uses $_SERVER['REQUEST_URI']
| 'QUERY_STRING'   Uses $_SERVER['QUERY_STRING']
| 'PATH_INFO'      Uses $_SERVER['PATH_INFO']
|
| WARNING: If you set this to 'PATH_INFO', URIs will always be URL-decoded!
*/
$config['uri_protocol']	= 'REQUEST_URI';

/*
|--------------------------------------------------------------------------
| URL suffix
|--------------------------------------------------------------------------
|
| This option allows you to add a suffix to all URLs generated by CodeIgniter.
| For more information please see the user guide:
|
| https://codeigniter.com/user_guide/general/urls.html
*/
$config['url_suffix'] = '';

/*
|--------------------------------------------------------------------------
| Default Character Set
|--------------------------------------------------------------------------
|
| This determines which character set is used by default in various methods
| that require a character set to be provided.
|
| See http://php.net/htmlspecialchars for a list of supported charsets.
|
*/
$config['charset'] = 'UTF-8';

/*
|--------------------------------------------------------------------------
| Class Extension Prefix
|--------------------------------------------------------------------------
|
| This item allows you to set the filename/classname prefix when extending
| native libraries.  For more information please see the user guide:
|
| https://codeigniter.com/user_guide/general/core_classes.html
| https://codeigniter.com/user_guide/general/creating_libraries.html
|
*/
$config['subclass_prefix'] = 'MY_';

/*
|--------------------------------------------------------------------------
| Composer auto-loading
|--------------------------------------------------------------------------
|
| Enabling this setting will tell CodeIgniter to look for a Composer
| package auto-loader script in application/vendor/autoload.php.
|
|	$config['composer_autoload'] = TRUE;
|
| Or if you have your vendor/ directory located somewhere else, you
| can opt to set a specific path as well:
|
|	$config['composer_autoload'] = '/path/to/vendor/autoload.php';
|
| For more information about Composer, please visit http://getcomposer.org/
|
| Note: This will NOT disable or override the CodeIgniter-specific
|	autoloading (application/config/autoload.php)
*/
$config['composer_autoload'] = FALSE;

/*
|--------------------------------------------------------------------------
| Allowed URL Characters
|--------------------------------------------------------------------------
|
| This lets you specify which characters are permitted within your URLs.
| When someone tries to submit a URL with disallowed characters they will
| get a warning message.
|
| As a security measure you are STRONGLY encouraged to restrict URLs to
| as few characters as possible.  By default only these are allowed: a-z 0-9~%.:_-
|
| Leave blank to allow all characters -- but only if you are insane.
|
| The configured value is actually a regular expression character group
| and it will be executed as: ! preg_match('/^[<permitted_uri_chars>]+$/i
|
| DO NOT CHANGE THIS UNLESS YOU FULLY UNDERSTAND THE REPERCUSSIONS!!
|
*/
$config['permitted_uri_chars'] = 'a-z 0-9~%.:_\-';

/*
|--------------------------------------------------------------------------
| Enable Query Strings
|--------------------------------------------------------------------------
|
| By default CodeIgniter uses search-engine friendly segment based URLs:
| example.com/who/what/where/
|
| You can optionally enable standard query string based URLs:
| example.com?who=me&what=something&where=here
|
| Options are: TRUE or FALSE (boolean)
|
| The other items let you set the query string 'words' that will
| invoke your controllers and its functions:
| example.com/index.php?c=controller&m=function
|
| Please note that some of the helpers won't work as expected when
| this feature is enabled, since CodeIgniter is designed primarily to
| use segment based URLs.
|
*/
$config['enable_query_strings'] = FALSE;
$config['controller_trigger'] = 'c';
$config['function_trigger'] = 'm';
$config['directory_trigger'] = 'd';

/*
|--------------------------------------------------------------------------
| Allow $_GET array
|--------------------------------------------------------------------------
|
| By default CodeIgniter enables access to the $_GET array.  If for some
| reason you would like to disable it, set 'allow_get_array' to FALSE.
|
| WARNING: This feature is DEPRECATED and currently available only
|          for backwards compatibility purposes!
|
*/
$config['allow_get_array'] = TRUE;

/*
|--------------------------------------------------------------------------
| Error Logging Threshold
|--------------------------------------------------------------------------
|
| You can enable error logging by setting a threshold over zero. The
| threshold determines what gets logged. Threshold options are:
|
|	0 = Disables logging, Error logging TURNED OFF
|	1 = Error Messages (including PHP errors)
|	2 = Debug Messages
|	3 = Informational Messages
|	4 = All Messages
|
| You can also pass an array with threshold levels to show individual error types
|
| 	array(2) = Debug Messages, without Error Messages
|
| For a live site you'll usually only enable Errors (1) to be logged otherwise
| your log files will fill up very fast.
|
*/
$config['log_threshold'] = '%log_threshold%';

/*
|--------------------------------------------------------------------------
| Error Logging Directory Path
|--------------------------------------------------------------------------
|
| Leave this BLANK unless you would like to set something other than the default
| application/logs/ directory. Use a full server path with trailing slash.
|
*/
$config['log_path'] = '';

/*
|--------------------------------------------------------------------------
| One Logfile (true) or daily logfile?
|--------------------------------------------------------------------------
|
| Leave this set to false unless you would like to have one big logfile
| at application/logs/ directory.
|
| true == one big log
| false (or non-existent): daily logs
*/
$config['one_log'] = false;

/*
|--------------------------------------------------------------------------
| Log File Extension
|--------------------------------------------------------------------------
|
| The default filename extension for log files. The default 'php' allows for
| protecting the log files via basic scripting, when they are to be stored
| under a publicly accessible directory.
|
| Note: Leaving it blank will default to 'php'.
|
*/
$config['log_file_extension'] = '';

/*
|--------------------------------------------------------------------------
| Log File Permissions
|--------------------------------------------------------------------------
|
| The file system permissions to be applied on newly created log files.
|
| IMPORTANT: This MUST be an integer (no quotes) and you MUST use octal
|            integer notation (i.e. 0700, 0644, etc.)
*/
$config['log_file_permissions'] = 0644;

/*
|--------------------------------------------------------------------------
| Date Format for Logs
|--------------------------------------------------------------------------
|
| Each item that is logged has an associated date. You can use PHP date
| codes to set your own date formatting
|
*/
$config['log_date_format'] = 'Y-m-d H:i:s';

/*
|--------------------------------------------------------------------------
| Error Views Directory Path
|--------------------------------------------------------------------------
|
| Leave this BLANK unless you would like to set something other than the default
| application/views/errors/ directory.  Use a full server path with trailing slash.
|
*/
$config['error_views_path'] = '';

/*
|--------------------------------------------------------------------------
| Cache Configuration
|--------------------------------------------------------------------------
|
| CodeIgniter supports multiple cache adapters to improve application performance
| by storing frequently accessed data.
| 
| Important Notice:
| There might some places where Wavelog forces the file adapter instead using the configured one.
| This happens when caching for large files like images or comparable data is needed. So even
| when you configure another adapter here, Wavelog might still use file caching in some places and respects 
| the configured cache path for that.
|
| 'cache_path'
|     Directory path for file-based caching. Leave BLANK to use the default
|     application/cache/ directory. Use absolute paths with trailing slash.
|     Must be writable by the web server (typically www-data or apache user).
|     This is only used for 'file' cache adapter.
|     Example: /var/cache/wavelog/ or /tmp/wavelog_cache/
|
| 'cache_adapter'
|     The primary cache adapter to use. Options include:
|     - 'file'      : File-based caching (default, works everywhere)
|     - 'redis'     : Redis in-memory cache (requires Redis server & extension)
|     - 'memcached' : Memcached (requires Memcached server & extension)
|     - 'apcu'      : APCu in-memory cache (requires APCu extension)
|
| 'cache_backup'
|     Fallback adapter if primary adapter fails or is unavailable.
|     Recommended: 'file' as a safe fallback option
|
| 'cache_key_prefix'
|     Prefix added to all cache keys to avoid collisions between
|     applications sharing the same cache storage.
|
| Note: Redis configuration is stored separately in application/config/redis.php
|
*/
$config['cache_path'] = '';
$config['cache_adapter'] = 'apcu';
$config['cache_backup'] = 'file';
$config['cache_key_prefix'] = '';

/*
|--------------------------------------------------------------------------
| Cache Include Query String
|--------------------------------------------------------------------------
|
| Whether to take the URL query string into consideration when generating
| output cache files. Valid options are:
|
|	FALSE      = Disabled
|	TRUE       = Enabled, take all query parameters into account.
|	             Please be aware that this may result in numerous cache
|	             files generated for the same page over and over again.
|	array('q') = Enabled, but only take into account the specified list
|	             of query parameters.
|
*/
$config['cache_query_string'] = FALSE;

/*
|--------------------------------------------------------------------------
| Encryption Key
|--------------------------------------------------------------------------
|
| Encryption Key is used to encrypt sensitive data. Choose a strong and secure key.
| Example: 'cnawuihp87f4g3ofb837rf93brlcve378rgf93be9837dgvzcl39rlzfbrzvc834lvvf83frgv83zrbzv'
|
|
*/
$config['encryption_key'] = '%encryptionkey%';

/*
|--------------------------------------------------------------------------
| Session Variables
|--------------------------------------------------------------------------
|
| 'sess_driver'
|
|	The storage driver to use: files, database, redis, redis2, memcached
|
|	'redis2' is Wavelog's own Redis driver. It behaves like 'redis' but waits
|	for the session lock with BLPOP instead of polling, so parallel AJAX
|	requests of the same user are no longer delayed by up to a second each.
|	When redis is needed, use 'redis2' instead of 'redis' for better performance
|   unless you have a really good reason to use the original 'redis' driver.
|
| 'sess_cookie_name'
|
|	The session cookie name, must contain only [0-9a-z_-] characters
|
| 'sess_expiration'
|
|	The number of SECONDS you want the session to last.
|	Default: 43200 seconds (12 hours).
|   Setting to 0 means use the default value of 43200 seconds (12 hours).
|
| 'sess_save_path'
|
|	The location to save sessions to, driver dependent.
|
|	For the 'files' driver, it's a path to a writable directory.
|	WARNING: Only absolute paths are supported!
|
|	For the 'database' driver, it's a table name.
|	Please read up the manual for the format with other session drivers.
|
|	IMPORTANT: You are REQUIRED to set a valid save path!
|
| 'sess_match_ip'
|
|	Whether to match the user's IP address when reading the session data.
|
|	WARNING: If you're using the database driver, don't forget to update
|	         your session table's PRIMARY KEY when changing this setting.
|
| 'sess_time_to_update'
|
|	How many seconds between CI regenerating the session ID.
|
| 'sess_regenerate_destroy'
|
|	Whether to destroy session data associated with the old session ID
|	when auto-regenerating the session ID. When set to FALSE, the data
|	will be later deleted by the garbage collector.
|
| Other session cookie settings are shared with the rest of the application,
| except for 'cookie_prefix' and 'cookie_httponly', which are ignored here.
|
*/
$config['sess_driver'] = 'files';
$config['sess_cookie_name'] = 'ci_wavelog';
$config['sess_expiration'] = 43200;
$config['sess_save_path'] = '/tmp';
$config['sess_match_ip'] = FALSE;
$config['sess_time_to_update'] = 300;
$config['sess_regenerate_destroy'] = FALSE;

/*
 * To make sure we do not collect infinite sessions we set some garbage collection settings
 * see https://www.php.net/manual/en/session.configuration.php#ini.session.gc-probability
 * and https://www.php.net/manual/en/session.configuration.php#ini.session.gc-divisor
 * and https://osvaldas.info/enabling-codeigniters-garbage-collector/
 *
 * set the probability to 1/1000 to make sure we do not collect too often
*/
$config['sess_gc_probability'] = 1;
$config['sess_gc_divisor'] = 1000;

/*
|--------------------------------------------------------------------------
| Cookie Related Variables
|--------------------------------------------------------------------------
|
| 'cookie_prefix'   = Set a cookie name prefix if you need to avoid collisions
| 'cookie_domain'   = Set to .your-domain.com for site-wide cookies
| 'cookie_path'     = Typically will be a forward slash
| 'cookie_secure'   = Cookie will only be set if a secure HTTPS connection exists.
| 'cookie_samesite' = Cookie SameSite attribute (None, Lax, Strict)
|
| Note: These settings (with the exception of 'cookie_prefix' and
|       'cookie_httponly') will also affect sessions.
|
*/
$config['cookie_prefix']	= '';
$config['cookie_domain']	= '';
$config['cookie_path']		= '/';
$config['cookie_secure']	= FALSE;
$config['cookie_samesite']  = 'Lax';

/*
|--------------------------------------------------------------------------
| Standardize newlines
|--------------------------------------------------------------------------
|
| Determines whether to standardize newline characters in input data,
| meaning to replace \r\n, \r, \n occurrences with the PHP_EOL value.
|
| WARNING: This feature is DEPRECATED and currently available only
|          for backwards compatibility purposes!
|
*/
$config['standardize_newlines'] = FALSE;

/*
|--------------------------------------------------------------------------
| Global XSS Filtering
|--------------------------------------------------------------------------
|
| Determines whether the XSS filter is always active when GET, POST or
| COOKIE data is encountered
|
| WARNING: This feature is DEPRECATED and currently available only
|          for backwards compatibility purposes!
|
*/
$config['global_xss_filtering'] = FALSE;

/*
|--------------------------------------------------------------------------
| Cross Site Request Forgery
|--------------------------------------------------------------------------
| Enables a CSRF cookie token to be set. When set to TRUE, token will be
| checked on a submitted form. If you are accepting user data, it is strongly
| recommended CSRF protection be enabled.
|
| 'csrf_token_name' = The token name
| 'csrf_cookie_name' = The cookie name
| 'csrf_expire' = The number in seconds the token should expire.
| 'csrf_regenerate' = Regenerate token on every submission
| 'csrf_exclude_uris' = Array of URIs which ignore CSRF checks
*/
$config['csrf_protection'] = FALSE;
$config['csrf_token_name'] = 'csrf_test_name';
$config['csrf_cookie_name'] = 'csrf_cookie_name';
$config['csrf_expire'] = 7200;
$config['csrf_regenerate'] = TRUE;
$config['csrf_exclude_uris'] = array();

/*
|--------------------------------------------------------------------------
| Output Compression
|--------------------------------------------------------------------------
|
| Enables Gzip output compression for faster page loads.  If enabled,
| the output class will test whether your server supports Gzip.
| Even if it does, however, not all browsers support compression
| so enable only if you are reasonably sure your visitors can handle it.
|
| Only used if zlib.output_compression is turned off in your php.ini.
| Please do not use it together with httpd-level output compression.
|
| VERY IMPORTANT:  If you are getting a blank page when compression is enabled it
| means you are prematurely outputting something to your browser. It could
| even be a line of whitespace at the end of one of your scripts.  For
| compression to work, nothing can be sent before the output buffer is called
| by the output class.  Do not 'echo' any values with compression enabled.
|
*/
$config['compress_output'] = FALSE;

/*
|--------------------------------------------------------------------------
| Master Time Reference
|--------------------------------------------------------------------------
|
| Options are 'local' or any PHP supported timezone. This preference tells
| the system whether to use your server's local time as the master 'now'
| reference, or convert it to the configured one timezone. See the 'date
| helper' page of the user guide for information regarding date handling.
|
*/
$config['time_reference'] = 'UTC';
date_default_timezone_set($config['time_reference']);

/*
|--------------------------------------------------------------------------
| Rewrite PHP Short Tags
|--------------------------------------------------------------------------
|
| If your PHP installation does not have short tag support enabled CI
| can rewrite the tags on-the-fly, enabling you to utilize that syntax
| in your view files.  Options are TRUE or FALSE (boolean)
|
| Note: You need to have eval() enabled for this to work.
|
*/
$config['rewrite_short_tags'] = FALSE;

/*
|--------------------------------------------------------------------------
| Reverse Proxy IPs
|--------------------------------------------------------------------------
|
| If your server is behind a reverse proxy, you must whitelist the proxy
| IP addresses from which CodeIgniter should trust headers such as
| HTTP_X_FORWARDED_FOR and HTTP_CLIENT_IP in order to properly identify
| the visitor's IP address.
|
| You can use both an array or a comma-separated list of proxy addresses,
| as well as specifying whole subnets. Here are a few examples:
|
| Comma-separated:	'10.0.1.200,192.168.5.0/24'
| Array:		array('10.0.1.200', '192.168.5.0/24')
*/
$config['proxy_ips'] = '';

/*
|--------------------------------------------------------------------------
| Users Data Directory Options
|--------------------------------------------------------------------------
|
|	'userdata'		Name of principal/centralized data folder
|
|   If you are a contributor to Wavelog you perhaps should add this folder path to .gitignore
|
*/

$config['userdata'] = 'userdata';

/*
|--------------------------------------------------------------------------
| Disable Syncing to 3rd party-Services at UI
|--------------------------------------------------------------------------
|
| Here you can disable triggering the syncing-logics by Users.
| Helpful if u have a huge instance or active-users, because of preventing race-conditions between UI and Cron
|
*/

$config['disable_manual_lotw'] = false;
$config['disable_manual_eqsl'] = false;
$config['disable_manual_hrdlog'] = false;
$config['disable_manual_qrz'] = false;

/*
|--------------------------------------------------------------------------
| Disables QSL-Image-Feature
|--------------------------------------------------------------------------
|
| This disabled the whole QSL image feature if you don't need it and want to hide it.
| Set to true will hide all QSL image related stuff in Wavelog
|
*/

$config['disable_qsl'] = false;

/*
|--------------------------------------------------------------------------
| Disables OQRS-Feature
|--------------------------------------------------------------------------
|
| This disabled the whole OQRS feature if you don't need it and want to hide it.
| Set to true will hide all OQRS related stuff in Wavelog
|
*/

$config['disable_oqrs'] = false;

/*
|--------------------------------------------------------------------------
| Special Callsign Feature aka. Clubstations Support
|--------------------------------------------------------------------------
|
| This config switch is meant for Special Callsign operations or Clubstations.
| If this switch is set to true it enables a whole bunch of features to handle Special Callsigns and Club Callsigns.
| For more Information please visit the Wiki:
| https://docs.wavelog.org/admin-guide/administration/clubstations/
|
| !!! Important !!!
| $config['disable_impersonate'] has to be set to false to use this feature.
|
*/

$config['special_callsign'] = false;


/*
|--------------------------------------------------------------------------
| Impersonate
|--------------------------------------------------------------------------
|
| This config switch disables the impersonate feature. This feature is used to impersonate another user.
| Impersonate is enabled by default. To disable it, set the value to false. Also the special_callsign feature needs this to be false.
|
*/

$config['disable_impersonate'] = false;


/*
|--------------------------------------------------------------------------
| Cronmanager Allow Insecure
|--------------------------------------------------------------------------
|
| The cronmanager needs http or https with a valid certificate to work.
| If you want to use it with https and a self-signed certificate, you need to set this to true.
|
*/

$config['cron_allow_insecure'] = false;

/*
|--------------------------------------------------------------------------
| Update / version check
|--------------------------------------------------------------------------

| This config switch disables the check for newer releases on github and
| hides the banner to admin users if a newer release as published.
| Default ON.
 */

$config['disable_version_check'] = false;

/*
|--------------------------------------------------------------------------
| eqsl.cc Massdownload
|--------------------------------------------------------------------------
|
| The eqsl.cc mass download function is not threadsafe. So it is disabled by default.
| Please consider enabling this carefully. Not recommended for multi-user environments.
 */

$config['enable_eqsl_massdownload'] = false;

/*
|--------------------------------------------------------------------------
| Lock Account after n failed login-attempts
|--------------------------------------------------------------------------
 */

 $config['max_login_attempts'] = 3;

/*
|--------------------------------------------------------------------------
| Disable User QSO Count in User List (Admin Menu)
| Reason for this setting is to prevent performance issues on large installations
| where the QSO count is not needed. Set to true to disable the QSO count.
| This also hides the last Operator for CLubstations. Default is false.
|--------------------------------------------------------------------------
 */

 $config['disable_user_stats'] = false;

/*
|--------------------------------------------------------------------------
| Enable DCL Interface
| Set this to true if your Users and you want to connect your instance to the German DCL
|--------------------------------------------------------------------------
 */

 $config['enable_dcl_interface'] = true;

/*
|--------------------------------------------------------------------------
| DXCluster File Cache
|--------------------------------------------------------------------------
|
| Controls file-based caching for DXCluster features. Two independent settings:
|
| 1. enable_dxcluster_file_cache_band
|    - Caches processed spot lists (WITHOUT worked status) from DXCache API
|    - Cache is INSTANCE-WIDE (shared by all users)
|    - Cache duration: 59 seconds
|    - Cache key format: dxcluster_raw_{maxage}_{continent}_{mode}_{band}
|    - Example: dxcluster_raw_60_Any_All_20m
|    - Contains: callsign, frequency, DXCC, mode, age, metadata
|    - Does NOT contain: worked/confirmed status (always false in cache)
|    - Set to TRUE to reduce API calls and speed up spot list loading
|    - Set to FALSE to always fetch fresh data from API
|
| 2. enable_dxcluster_file_cache_worked
|    - Caches worked/confirmed status lookups from database
|    - Cache is USER-SPECIFIC (separate for each user/logbook)
|    - Cache duration: 15 minutes (900 seconds)
|    - Cache includes: All bands/modes combinations per callsign/DXCC/continent
|    - Set to TRUE to significantly reduce database load
|    - Set to FALSE to always query database for fresh status
|
| Default: false (both caching disabled)
|
| Recommendation:
|   - Enable BAND cache on all installations to reduce API load (instance-wide)
|   - Enable WORKED cache on high-traffic multi-user installations to reduce DB queries
| Warning: WORKED cache may cause high disk usage on large multi-user installations.
|--------------------------------------------------------------------------
 */

$config['enable_dxcluster_file_cache_band'] = false;
$config['enable_dxcluster_file_cache_worked'] = false;

/*
|--------------------------------------------------------------------------
| DXCluster Refresh Time
|--------------------------------------------------------------------------
| This defines the how often the DXCluster spots are refreshed in seconds. Default is 30 seconds.
| Be careful with this and do not set it too low because depending on how many QSOs a user has it 
| can cause a lot of load on the server. Also consider enabling a proper caching (file caches are 
| not recommended for very large installations) to reduce the load on the server.
|--------------------------------------------------------------------------
 */
$config['dxcluster_refresh_time'] = 30;

/*
|--------------------------------------------------------------------------
| Internal tools
| Set this to true if you want to display the admin internal tools in the header menu
|--------------------------------------------------------------------------
 */
$config['internal_tools'] = false;

/*
|--------------------------------------------------------------------------
| API Rate Limiting
|--------------------------------------------------------------------------
|
| Rate limiting for API endpoints using sliding window algorithm.
| Rate limiting is only enabled if api_rate_limits is defined (not null/empty).
|
| Format: Array of endpoint-specific limits
|   - Endpoint name: the API function name (e.g., 'private_lookup', 'lookup')
|   - requests: maximum number of requests allowed
|   - window: time window in seconds
|
| Example configuration:
|
| $config['api_rate_limits'] = [
|     'private_lookup' => ['requests' => 60, 'window' => 60],  // 60 requests per minute
|     'lookup'         => ['requests' => 60, 'window' => 60],  // 60 requests per minute
|     'qso'            => ['requests' => 10, 'window' => 60],  // 10 requests per minute
|     'default'        => ['requests' => 30, 'window' => 60],  // Default for all other endpoints
| ];
|
| Set to null or leave commented to disable rate limiting entirely:
| $config['api_rate_limits'] = null;
|
| The 'default' key is optional and applies to any API endpoint not explicitly
| listed. If no default is provided, endpoints without specific limits have no
| rate limiting applied.
|
| Rate limiting tracks requests by:
|   - API key (if provided)
|   - Session user ID (if authenticated via session)
|   - IP address (fallback)
|
*/

// Example configuration (uncomment to enable):
// $config['api_rate_limits'] = [
//     'private_lookup' => ['requests' => 60, 'window' => 60],
//     'lookup'         => ['requests' => 60, 'window' => 60],
//     'qso'            => ['requests' => 10, 'window' => 60],
//     'radio'          => ['requests' => 60, 'window' => 60],
//     'statistics'     => ['requests' => 30, 'window' => 60],
//     'default'        => ['requests' => 30, 'window' => 60],
// ];