ham-ref/wfview
1
0
Fork 0
mirror of https://github.com/wf-group/wfview synced 2026-08-13 17:32:59 -04:00
Code Issues Projects Releases Packages Wiki Activity Actions
wfview/rigcommander.cpp
Elliott Liggett 37b7ccb65b Enhanced code that finds radio serial ports. Added error reporting to 
the user if serial port isn't opening. Added command-line arguments for
serial port (example: "-p /dev/ttyUSB0" or "--port /dev/ttyUSB0").
Cleaned up some of the debug messages. wfview also will now tell the
user what radio was found in the status bar of the main window.

Added the begininning of code to determine the waveform type (center or
fixed). rigcommander now knows which is which. The next step is to emit
a signal when this changes, which then causes the main window to check
or uncheck the box (without triggering any other code).

Added some TODO remarks on mode (DV, DD).

Added some command line arguments that are not used at this time for --
host and --civ.
2021-02-02 01:05:59 -08:00

1331 lines
38 KiB
C++
Raw Blame History

#include "rigcommander.h"
#include <QDebug>
#include "rigidentities.h"
// Copytight 2017-2020 Elliott H. Liggett
// This file parses data from the radio and also forms commands to the radio.
// The radio physical interface is handled by the commHandler() instance "comm"
// TODO:
// + Allow parameters to pass to the commHandler indicating which serial port to use
// + Impliment additional commands (of course)
// + Impliment external serial port "pass through"
// + Impliment XML RPC server?
// + Grab initial state of band scope and adjust UI accordingly.
//
// See here for a wonderful CI-V overview:
// http://www.plicht.de/ekki/civ/civ-p0a.html
//
// The IC-7300 "full" manual also contains a command reference.
// How to make spectrum display stop using rigctl:
// echo "w \0xFE\0xFE\0x94\0xE0\0x27\0x11\0x00\0xFD" | rigctl -m 373 -r /dev/ttyUSB0 -s 115200 -vvvvv
// Note: When sending \x00, must use QByteArray.setRawData()
rigCommander::rigCommander(unsigned char rigCivAddr, QString rigSerialPort, quint32 rigBaudRate)
{
// construct
// TODO: Bring this parameter and the comm port from the UI.
// Keep in hex in the UI as is done with other CIV apps.
// civAddr = 0x94; // address of the radio. Decimal is 148.
civAddr = rigCivAddr; // address of the radio. Decimal is 148.
setCIVAddr(civAddr);
usingNativeLAN = false; // TODO: set to true if we are connected over ethernet to the rig
spectSeqMax = 0; // this is now set after rig ID determined
//compCivAddr = 0xE1;
//payloadPrefix = QByteArray("\xFE\xFE\x94\xE0");
payloadPrefix = QByteArray("\xFE\xFE");
payloadPrefix.append(civAddr);
payloadPrefix.append(compCivAddr);
// payloadPrefix.append("\xE0");
payloadSuffix = QByteArray("\xFD");
lookingForRig = false;
foundRig = false;
// TODO: list full contents of /dev/serial, grep for IC-7300
// /dev/serial/by-path$ ls
// total 0
// lrwxrwxrwx 1 root root 13 Nov 24 21:43 pci-0000:00:12.0-usb-0:2.1:1.0-port0 -> ../../ttyUSB0
// comm = new commHandler("/dev/ttyUSB0");
this->rigSerialPort = rigSerialPort;
comm = new commHandler(rigSerialPort, rigBaudRate);
// data from the comm port to the program:
connect(comm, SIGNAL(haveDataFromPort(QByteArray)), this, SLOT(handleNewData(QByteArray)));
// data from the program to the comm port:
connect(this, SIGNAL(dataForComm(QByteArray)), comm, SLOT(receiveDataFromUserToRig(QByteArray)));
connect(comm, SIGNAL(haveSerialPortError(QString,QString)), this, SLOT(handleSerialPortError(QString,QString)));
connect(this, SIGNAL(getMoreDebug()), comm, SLOT(debugThis()));
pttAllowed = true; // This is for developing, set to false for "safe" debugging. Set to true for deployment.
}
rigCommander::~rigCommander()
{
delete comm;
}
void rigCommander::process()
{
// new thread enters here. Do nothing but do check for errors.
if(comm->serialError)
{
emit haveSerialPortError(rigSerialPort, QString("Error from commhandler. Check serial port."));
}
}
void rigCommander::handleSerialPortError(const QString port, const QString errorText)
{
qDebug() << "Error using port " << port << " message: " << errorText;
emit haveSerialPortError(port, errorText);
}
void rigCommander::findRigs()
{
// This function sends data to 0x00 ("broadcast") to look for any connected rig.
lookingForRig = true;
foundRig = false;
QByteArray data;
QByteArray data2;
data.setRawData("\xFE\xFE\x00", 3);
data.append(compCivAddr); // wfview's address, 0xE1
data2.setRawData("\x19\x00", 2); // get rig ID
data.append(data2);
data.append(payloadSuffix);
//check this:
#ifdef QT_DEBUG
qDebug() << "About to request list of radios connected, using this command: ";
printHex(data, false, true);
#endif
emit dataForComm(data);
return;
}
void rigCommander::prepDataAndSend(QByteArray data)
{
data.prepend(payloadPrefix);
//printHex(data, false, true);
data.append(payloadSuffix);
#ifdef QT_DEBUG
qDebug() << "Final payload in rig commander to be sent to rig: ";
printHex(data, false, true);
#endif
emit dataForComm(data);
}
void rigCommander::enableSpectOutput()
{
QByteArray payload("\x27\x11\x01");
prepDataAndSend(payload);
}
void rigCommander::disableSpectOutput()
{
QByteArray payload;
payload.setRawData("\x27\x11\x00", 3);
prepDataAndSend(payload);
}
void rigCommander::enableSpectrumDisplay()
{
// 27 10 01
QByteArray payload("\x27\x10\x01");
prepDataAndSend(payload);
}
void rigCommander::disableSpectrumDisplay()
{
// 27 10 00
QByteArray payload;
payload.setRawData("\x27\x10\x00", 3);
prepDataAndSend(payload);
}
void rigCommander::setSpectrumBounds()
{
}
void rigCommander::getScopeMode()
{
// center or fixed
QByteArray payload;
payload.setRawData("\x27\x14", 2);
prepDataAndSend(payload);
}
void rigCommander::getScopeEdge()
{
QByteArray payload;
payload.setRawData("\x27\x16", 2);
prepDataAndSend(payload);
}
void rigCommander::setScopeEdge(char edge)
{
// 1 2 or 3
// 27 16 00 0X
if((edge <1) || (edge >3))
return;
QByteArray payload;
payload.setRawData("\x27\x16\x00", 3);
payload.append(edge);
prepDataAndSend(payload);
}
void rigCommander::getScopeSpan()
{
QByteArray payload;
payload.setRawData("\x27\x15", 2);
prepDataAndSend(payload);
}
void rigCommander::setScopeSpan(char span)
{
// See ICD, page 165, "19-12".
// 2.5k = 0
// 5k = 2, etc.
if((span <0 ) || (span >7))
return;
QByteArray payload;
double freq; // MHz
payload.setRawData("\x27\x15\x00", 3);
// next 6 bytes are the frequency
switch(span)
{
case 0:
// 2.5k
freq = 2.5E-3;
break;
case 1:
// 5k
freq = 5.0E-3;
break;
case 2:
freq = 10.0E-3;
break;
case 3:
freq = 25.0E-3;
break;
case 4:
freq = 50.0E-3;
break;
case 5:
freq = 100.0E-3;
break;
case 6:
freq = 250.0E-3;
break;
case 7:
freq = 500.0E-3;
break;
default:
return;
break;
}
payload.append( makeFreqPayload(freq));
payload.append("\x00");
// printHex(payload, false, true);
prepDataAndSend(payload);
}
void rigCommander::setSpectrumCenteredMode(bool centerEnable)
{
QByteArray specModePayload;
if(centerEnable)
{
specModePayload.setRawData("\x27\x14\x00\x00", 4);
} else {
specModePayload.setRawData("\x27\x14\x00\x01", 4);
}
prepDataAndSend(specModePayload);
}
void rigCommander::getSpectrumCenterMode()
{
QByteArray specModePayload;
specModePayload.setRawData("\x27\x14", 2);
prepDataAndSend(specModePayload);
}
void rigCommander::setFrequency(double freq)
{
QByteArray freqPayload = makeFreqPayload(freq);
QByteArray cmdPayload;
cmdPayload.append(freqPayload);
cmdPayload.prepend('\x00');
//printHex(cmdPayload, false, true);
prepDataAndSend(cmdPayload);
}
QByteArray rigCommander::makeFreqPayload(double freq)
{
quint64 freqInt = (quint64) (freq * 1E6);
QByteArray result;
unsigned char a;
int numchars = 5;
for (int i = 0; i < numchars; i++) {
a = 0;
a |= (freqInt) % 10;
freqInt /= 10;
a |= ((freqInt) % 10)<<4;
freqInt /= 10;
result.append(a);
//printHex(result, false, true);
}
//qDebug() << "encoded frequency for " << freq << " as int " << freqInt;
//printHex(result, false, true);
return result;
}
void rigCommander::setMode(char mode)
{
QByteArray payload;
if((mode >=0) && (mode < 10))
{
// annoying hack as mode 6 is undefined.
if(mode > 5)
{
mode++;
}
// valid
payload.setRawData("\x06", 1); // cmd 06 needs filter specified
//payload.setRawData("\x04", 1); // cmd 04 will apply the default filter, but it seems to always pick FIL 02
payload.append(mode);
payload.append("\x03"); // wide band
prepDataAndSend(payload);
}
}
void rigCommander::setDataMode(bool dataOn)
{
QByteArray payload;
payload.setRawData("\x1A\x06", 2);
if(dataOn)
{
payload.append("\x01\x03", 2); // data mode on, wide bandwidth
} else {
payload.append("\x00\x00", 2); // data mode off, bandwidth not defined per ICD.
}
prepDataAndSend(payload);
}
void rigCommander::getFrequency()
{
// figure out frequency and then respond with haveFrequency();
// send request to radio
// 1. make the data
QByteArray payload("\x03");
prepDataAndSend(payload);
}
void rigCommander::getMode()
{
QByteArray payload("\x04");
prepDataAndSend(payload);
}
void rigCommander::getDataMode()
{
QByteArray payload("\x1A\x06");
prepDataAndSend(payload);
}
void rigCommander::getPTT()
{
QByteArray payload("\x1C\x00", 2);
prepDataAndSend(payload);
}
void rigCommander::getBandStackReg(char band, char regCode)
{
QByteArray payload("\x1A\x01");
payload.append(band); // [01 through 11]
payload.append(regCode); // [01...03]. 01 = latest, 03 = oldest
prepDataAndSend(payload);
}
void rigCommander::setPTT(bool pttOn)
{
//bool pttAllowed = false;
if(pttAllowed)
{
QByteArray payload("\x1C\x00", 2);
payload.append((char)pttOn);
prepDataAndSend(payload);
}
}
void rigCommander::setCIVAddr(unsigned char civAddr)
{
// Note: This is the radio's CIV address
// the computer's CIV address is defined in the header file.
this->civAddr = civAddr;
}
void rigCommander::handleNewData(const QByteArray &data)
{
parseData(data);
}
void rigCommander::parseData(QByteArray dataInput)
{
// TODO: Clean this up.
// It finally works very nicely, needs to be streamlined.
//
int index = 0;
volatile int count = 0; // debug purposes
// use this:
QList <QByteArray> dataList = dataInput.split('\xFD');
QByteArray data;
// qDebug() << "data list has this many elements: " << dataList.size();
if (dataList.last().isEmpty())
{
dataList.removeLast(); // if the original ended in FD, then there is a blank entry at the end.
}
// Only thing is, each frame is missing '\xFD' at the end. So append! Keeps the frames intact.
for(index = 0; index < dataList.count(); index++)
{
data = dataList[index];
data.append('\xFD'); // because we expect it to be there.
// foreach(listitem)
// listitem.append('\xFD');
// continue parsing...
count++;
// Data echo'd back from the rig start with this:
// fe fe 94 e0 ...... fd
// Data from the rig that is not an echo start with this:
// fe fe e0 94 ...... fd (for example, a reply to a query)
// Data from the rig that was not asked for is sent to controller 0x00:
// fe fe 00 94 ...... fd (for example, user rotates the tune control or changes the mode)
//qDebug() << "Data received: ";
//printHex(data, false, true);
if(data.length() < 4)
{
if(data.length())
{
// Finally this almost never happens
// qDebug() << "Data length too short: " << data.length() << " bytes. Data:";
//printHex(data, false, true);
}
// no
//return;
// maybe:
// continue;
}
if(!data.startsWith("\xFE\xFE"))
{
// qDebug() << "Warning: Invalid data received, did not start with FE FE.";
// find 94 e0 and shift over,
// or look inside for a second FE FE
// Often a local echo will miss a few bytes at the beginning.
if(data.startsWith('\xFE'))
{
data.prepend('\xFE');
// qDebug() << "Warning: Working with prepended data stream.";
parseData(payloadIn);
return;
} else {
//qDebug() << "Error: Could not reconstruct corrupted data: ";
//printHex(data, false, true);
// data.right(data.length() - data.find('\xFE\xFE'));
// if found do not return and keep going.
return;
}
}
if((unsigned char)data[02] == civAddr)
{
// data is or begins with an echoback from what we sent
// find the first 'fd' and cut it. Then continue.
//payloadIn = data.right(data.length() - data.indexOf('\xfd')-1);
// qDebug() << "[FOUND] Trimmed off echo:";
//printHex(payloadIn, false, true);
//parseData(payloadIn);
//return;
}
incomingCIVAddr = data[03]; // track the CIV of the sender.
switch(data[02])
{
// case civAddr: // can't have a variable here :-(
// // data is or begins with an echoback from what we sent
// // find the first 'fd' and cut it. Then continue.
// payloadIn = data.right(data.length() - data.indexOf('\xfd')-1);
// //qDebug() << "Trimmed off echo:";
// //printHex(payloadIn, false, true);
// parseData(payloadIn);
// break;
// case '\xE0':
case (char)0xE0:
case (char)compCivAddr:
// data is a reply to some query we sent
// extract the payload out and parse.
// payload = getpayload(data); // or something
// parse (payload); // recursive ok?
payloadIn = data.right(data.length() - 4);
parseCommand();
break;
case '\x00':
// data send initiated by the rig due to user control
// extract the payload out and parse.
payloadIn = data.right(data.length() - 4);
parseCommand();
break;
default:
// could be for other equipment on the CIV network.
// just drop for now.
// relaySendOutData(data);
break;
}
}
/*
if(dataList.length() > 1)
{
qDebug() << "Recovered " << count << " frames from single data with size" << dataList.count();
}
*/
}
void rigCommander::parseCommand()
{
// note: data already is trimmed of the beginning FE FE E0 94 stuff.
#ifdef QT_DEBUG
if(payloadIn[00] != '\x27')
{
// debug only
printHex(payloadIn, false, true);
}
#endif
switch(payloadIn[00])
{
case 00:
// frequency data
parseFrequency();
break;
case 03:
parseFrequency();
break;
case '\x25':
if((int)payloadIn[1] == 0)
{
emit haveFrequency((double)parseFrequency(payloadIn, 5));
}
break;
case '\x01':
//qDebug() << "Have mode data";
this->parseMode();
break;
case '\x04':
//qDebug() << "Have mode data";
this->parseMode();
break;
case '\x05':
//qDebug() << "Have frequency data";
this->parseFrequency();
break;
case '\x06':
//qDebug() << "Have mode data";
this->parseMode();
break;
case '\x14':
// read levels
parseLevels();
break;
case '\x19':
// qDebug() << "Have rig ID: " << (unsigned int)payloadIn[2];
// printHex(payloadIn, false, true);
model = determineRadioModel(payloadIn[2]); // verify this is the model not the CIV
determineRigCaps();
qDebug() << "Have rig ID: decimal: " << (unsigned int)model;
break;
case '\x26':
if((int)payloadIn[1] == 0)
{
// This works but LSB comes out as CW?
// Also, an opportunity to read the data mode
// payloadIn = payloadIn.right(3);
// this->parseMode();
}
break;
case '\x27':
// scope data
//qDebug() << "Have scope data";
//printHex(payloadIn, false, true);
parseWFData();
//parseSpectrum();
break;
case '\x1A':
if(payloadIn[01] == '\x05')
{
parseDetailedRegisters1A05();
} else {
parseRegisters1A();
}
break;
case '\x1C':
parseRegisters1C();
break;
case '\xFB':
// Fine Business, ACK from rig.
break;
case '\xFA':
// error
#ifdef QT_DEBUG
qDebug() << "Error (FA) received from rig.";
printHex(payloadIn, false ,true);
#endif
break;
default:
// This gets hit a lot when the pseudo-term is
// using commands wfview doesn't know yet.
// qDebug() << "Have other data with cmd: " << std::hex << payloadIn[00];
// printHex(payloadIn, false, true);
break;
}
// is any payload left?
}
void rigCommander::parseLevels()
{
//qDebug() << "Received a level status readout: ";
// printHex(payloadIn, false, true);
// wrong: unsigned char level = (payloadIn[2] * 100) + payloadIn[03];
unsigned char hundreds = payloadIn[2];
unsigned char tens = (payloadIn[3] & 0xf0) >> 4;
unsigned char units = (payloadIn[3] & 0x0f);
unsigned char level = (100*hundreds) + (10*tens) + units;
//qDebug() << "Level is: " << (int)level << " or " << 100.0*level/255.0 << "%";
// Typical RF gain response (rather low setting):
// "INDEX: 00 01 02 03 04 "
// "DATA: 14 02 00 78 fd "
switch(payloadIn[1])
{
case '\x01':
// AF level
emit haveAfGain(level);
break;
case '\x02':
// RX RF Gain
emit haveRfGain(level);
break;
case '\x03':
// Squelch level
emit haveSql(level);
break;
case '\x0A':
// TX RF level
emit haveTxPower(level);
break;
}
}
void rigCommander::getRfGain()
{
QByteArray payload("\x14\x02");
prepDataAndSend(payload);
}
void rigCommander::getAfGain()
{
QByteArray payload("\x14\x01");
prepDataAndSend(payload);
}
void rigCommander::getSql()
{
// Squelch
QByteArray payload("\x14\x03");
prepDataAndSend(payload);
}
void rigCommander::setRfGain(unsigned char level)
{
sendLevelCmd(0x02, level);
}
void rigCommander::setAfGain(unsigned char level)
{
sendLevelCmd(0x01, level);
}
void rigCommander::sendLevelCmd(unsigned char levAddr, unsigned char level)
{
QByteArray payload("\x14");
payload.append(levAddr);
// careful here. The value in the units and tens can't exceed 99.
// ie, can't do this: 01 f2
payload.append((int)level/100); // make sure it works with a zero
// convert the tens:
int tens = (level - 100*((int)level/100))/10;
// convert the units:
int units = level - 100*((int)level/100);
units = units - 10*((int)(units/10));
// combine and send:
payload.append((tens << 4) | (units) ); // make sure it works with a zero
prepDataAndSend(payload);
}
void rigCommander::parseRegisters1C()
{
// PTT lives here
// Not sure if 02 is the right place to switch.
// TODO: test this function
switch(payloadIn[01])
{
case '\x00':
parsePTT();
break;
case '\x01':
// ATU status (on/off/tuning)
parseATU();
break;
default:
break;
}
}
void rigCommander::parseATU()
{
// qDebug() << "Have ATU status from radio. Emitting.";
// Expect:
// [0]: 0x1c
// [1]: 0x01
// [2]: 0 = off, 0x01 = on, 0x02 = tuning in-progress
emit haveATUStatus((unsigned char) payloadIn[2]);
}
void rigCommander::parsePTT()
{
// read after payloadIn[02]
// Because I'm not sure about this:
qDebug() << "PTT status received, here is the hex dump:";
printHex(payloadIn, false, true);
if(payloadIn[2] == (char)0)
{
// PTT off
emit havePTTStatus(false);
} else {
// PTT on
emit havePTTStatus(true);
}
}
void rigCommander::parseRegisters1A()
{
// The simpler of the 1A stuff:
// 1A 06: data mode on/off
// 07: IP+ enable/disable
// 00: memory contents
// 01: band stacking memory contents (last freq used is stored here per-band)
// 03: filter width
// 04: AGC rate
// qDebug() << "Looking at register 1A :";
// printHex(payloadIn, false, true);
// "INDEX: 00 01 02 03 04 "
// "DATA: 1a 06 01 03 fd " (data mode enabled, filter width 3 selected)
switch(payloadIn[01])
{
case '\x00':
// Memory contents
break;
case '\x01':
// band stacking register
parseBandStackReg();
break;
case '\x06':
// data mode
// emit havedataMode( (bool) payloadIn[somebit])
// index
// 03 04
// XX YY
// XX = 00 (off) or 01 (on)
// YY: filter selected, 01 through 03.;
// if YY is 00 then XX was also set to 00
emit haveDataMode((bool)payloadIn[03]);
break;
case '\x07':
// IP+ status
break;
default:
break;
}
}
void rigCommander::parseBandStackReg()
{
// qDebug() << "Band stacking register response received: ";
// printHex(payloadIn, false, true);
// Reference output, 20 meters, regCode 01 (latest):
// "INDEX: 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 "
// "DATA: 1a 01 05 01 60 03 23 14 00 00 03 10 00 08 85 00 08 85 fd "
// char band = payloadIn[2];
// char regCode = payloadIn[3];
float freq = parseFrequency(payloadIn, 7);
bool dataOn = (payloadIn[11] & 0x10) >> 4; // not sure...
char mode = payloadIn[9];
// 09, 10 mode
// 11 digit RH: data mode on (1) or off (0)
// 11 digit LH: CTCSS 0 = off, 1 = TONE, 2 = TSQL
// 12, 13 : tone freq setting
// 14, 15 tone squelch freq setting
// if more, memory name (label) ascii
// qDebug() << "band: " << QString("%1").arg(band) << " regCode: " << (QString)regCode << " freq: " << freq;
// qDebug() << "mode: " << (QString)mode << " dataOn: " << dataOn;
emit haveBandStackReg(freq, mode, dataOn);
}
void rigCommander::parseDetailedRegisters1A05()
{
// It seems a lot of misc stuff is under this command and subcommand.
}
void rigCommander::parseWFData()
{
float freqSpan = 0.0;
switch(payloadIn[1])
{
case 0:
// Chunk of spectrum
parseSpectrum();
break;
case 0x10:
// confirming scope is on
break;
case 0x11:
// confirming output enabled/disabled of wf data.
break;
case 0x14:
// fixed or center
emit haveSpectrumFixedMode((bool)payloadIn[2]);
qDebug() << "received 0x14 command fix/center";
printHex(payloadIn, false, true);
// [1] 0x14
// [2] 0x00 (center), 0x01 (fixed)
break;
case 0x15:
// read span in center mode
// [1] 0x15
// [2] to [8] is span encoded as a frequency
freqSpan = parseFrequency(payloadIn, 8);
qDebug() << "Received 0x15 center span data: for frequency " << freqSpan;
printHex(payloadIn, false, true);
break;
case 0x16:
// read edge mode center in edge mode
emit haveScopeEdge((char)payloadIn[2]);
qDebug() << "Received 0x16 edge in center mode:";
printHex(payloadIn, false, true);
// [1] 0x16
// [2] 0x01, 0x02, 0x03: Edge 1,2,3
break;
case 0x19:
// scope reference level
// [1] 0x19
// [2] 0x00
// [3] 10dB digit, 1dB digit
// [4] 0.1dB digit, 0
// [5] 0x00 = +, 0x01 = -
break;
default:
qDebug() << "Unknown waveform data received: ";
printHex(payloadIn, false, true);
break;
}
}
void rigCommander::determineRigCaps()
{
//TODO: Add if(usingNativeLAN) condition
//TODO: Determine available bands (low priority, rig will reject out of band requests anyway)
rigCaps.model = model;
rigCaps.modelID = model; // may delete later
rigCaps.civ = incomingCIVAddr;
switch(model){
case model7300:
rigCaps.modelName = QString("IC-7300");
rigCaps.hasSpectrum = true;
rigCaps.spectSeqMax = 11;
rigCaps.spectAmpMax = 160;
rigCaps.spectLenMax = 475;
rigCaps.hasLan = false;
rigCaps.hasEthernet = false;
rigCaps.hasWiFi = false;
break;
case model9700:
rigCaps.modelName = QString("IC-9700");
rigCaps.hasSpectrum = true;
rigCaps.spectSeqMax = 11;
rigCaps.spectAmpMax = 160;
rigCaps.spectLenMax = 475;
rigCaps.hasLan = true;
rigCaps.hasEthernet = true;
rigCaps.hasWiFi = false;
break;
case model7610:
rigCaps.modelName = QString("IC-7610");
rigCaps.hasSpectrum = true;
rigCaps.spectSeqMax = 15;
rigCaps.spectAmpMax = 200;
rigCaps.spectLenMax = 689;
rigCaps.hasLan = true;
rigCaps.hasEthernet = true;
rigCaps.hasWiFi = false;
break;
case model7850:
rigCaps.modelName = QString("IC-785x");
rigCaps.hasSpectrum = true;
rigCaps.spectSeqMax = 15;
rigCaps.spectAmpMax = 136;
rigCaps.spectLenMax = 689;
rigCaps.hasLan = true;
rigCaps.hasEthernet = true;
rigCaps.hasWiFi = false;
break;
case model705:
rigCaps.modelName = QString("IC-705");
rigCaps.hasSpectrum = true;
rigCaps.spectSeqMax = 11;
rigCaps.spectAmpMax = 160;
rigCaps.spectLenMax = 475;
rigCaps.hasLan = true;
rigCaps.hasEthernet = false;
rigCaps.hasWiFi = true;
break;
default:
rigCaps.modelName = QString("IC-unknown");
rigCaps.hasSpectrum = false;
rigCaps.spectSeqMax = 0;
rigCaps.spectAmpMax = 0;
rigCaps.spectLenMax = 0;
rigCaps.hasLan = false;
rigCaps.hasEthernet = false;
rigCaps.hasWiFi = false;
break;
}
haveRigCaps = true;
if(lookingForRig)
{
lookingForRig = false;
foundRig = true;
#ifdef QT_DEBUG
qDebug() << "---Rig FOUND from broadcast query:";
#endif
this->civAddr = incomingCIVAddr; // Override and use immediately.
payloadPrefix = QByteArray("\xFE\xFE");
payloadPrefix.append(civAddr);
payloadPrefix.append(compCivAddr);
// if there is a compile-time error, remove the following line, the "hex" part is the issue:
qDebug() << "Using incomingCIVAddr: (int): " << this->civAddr << " hex: " << hex << this->civAddr;
emit discoveredRigID(rigCaps);
} else {
emit haveRigID(rigCaps);
}
}
void rigCommander::parseSpectrum()
{
if(!haveRigCaps)
{
#ifdef QT_DEBUG
qDebug() << "Spectrum received in rigCommander, but rigID is incomplete.";
#endif
return;
}
if(rigCaps.spectSeqMax == 0)
{
// there is a chance this will happen with rigs that support spectrum. Once our RigID query returns, we will parse correctly.
qDebug() << "Warning: Spectrum sequence max was zero, yet spectrum was received.";
return;
}
// Here is what to expect:
// payloadIn[00] = '\x27';
// payloadIn[01] = '\x00';
// payloadIn[02] = '\x00';
//
// Example long: (sequences 2-10, 50 pixels)
// "INDEX: 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 "
// "DATA: 27 00 00 07 11 27 13 15 01 00 22 21 09 08 06 19 0e 20 23 25 2c 2d 17 27 29 16 14 1b 1b 21 27 1a 18 17 1e 21 1b 24 21 22 23 13 19 23 2f 2d 25 25 0a 0e 1e 20 1f 1a 0c fd "
// ^--^--(seq 7/11)
// ^-- start waveform data 0x00 to 0xA0, index 05 to 54
//
// Example medium: (sequence #11)
// "INDEX: 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 "
// "DATA: 27 00 00 11 11 0b 13 21 23 1a 1b 22 1e 1a 1d 13 21 1d 26 28 1f 19 1a 18 09 2c 2c 2c 1a 1b fd "
// Example short: (sequence #1) includes center/fixed mode at [05]. No pixels.
// "INDEX: 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 "
// "DATA: 27 00 00 01 11 01 00 00 00 14 00 00 00 35 14 00 00 fd "
// ^-- mode 00 (center) or 01 (fixed)
// ^--14.00 MHz lower edge
// ^-- 14.350 MHz upper edge
// ^-- possibly 00=in range 01 = out of range
// Note, the index used here, -1, matches the ICD in the owner's manual.
// Owner's manual + 1 = our index.
// divs: Mode: Waveinfo: Len: Comment:
// 2-10 var var 56 Minimum wave information w/waveform data
// 11 10 26 31 Minimum wave information w/waveform data
// 1 1 0 18 Only Wave Information without waveform data
unsigned char sequence = bcdHexToDecimal(payloadIn[03]);
//unsigned char sequenceMax = bcdHexToDecimal(payloadIn[04]);
unsigned char scopeMode = bcdHexToDecimal(payloadIn[05]);
if(scopeMode != oldScopeMode)
{
//TODO:
// emit haveNewScopeMode(scopeMode);
oldScopeMode = scopeMode;
}
// unsigned char waveInfo = payloadIn[06]; // really just one byte?
//qDebug() << "Spectrum Data received: " << sequence << "/" << sequenceMax << " mode: " << scopeMode << " waveInfo: " << waveInfo << " length: " << payloadIn.length();
// Sequnce 2, index 05 is the start of data
// Sequence 11. index 05, is the last chunk
// Sequence 11, index 29, is the actual last pixel (it seems)
// It looks like the data length may be variable, so we need to detect it each time.
// start at payloadIn.length()-1 (to override the FD). Never mind, index -1 bad.
// chop off FD.
if(sequence == 1)
{
// wave information
spectrumLine.clear();
// parseFrequency(endPosition); // overload does not emit! Return? Where? how...
spectrumStartFreq = parseFrequency(payloadIn, 9);
spectrumEndFreq = parseFrequency(payloadIn, 14);
if(scopeMode == 0)
{
// "center" mode, start is actuall center, end is bandwidth.
spectrumStartFreq -= spectrumEndFreq;
spectrumEndFreq = spectrumStartFreq + 2*(spectrumEndFreq);
}
} else if ((sequence > 1) && (sequence < rigCaps.spectSeqMax))
{
// spectrum from index 05 to index 54, length is 55 per segment. Length is 56 total. Pixel data is 50 pixels.
// sequence numbers 2 through 10, 50 pixels each. Total after sequence 10 is 450 pixels.
payloadIn.chop(1);
spectrumLine.insert(spectrumLine.length(), payloadIn.right(payloadIn.length() - 5)); // write over the FD, last one doesn't, oh well.
//qDebug() << "sequence: " << sequence << "spec index: " << (sequence-2)*55 << " payloadPosition: " << payloadIn.length() - 5 << " payload length: " << payloadIn.length();
} else if (sequence == rigCaps.spectSeqMax)
{
// last spectrum, a little bit different (last 25 pixels). Total at end is 475 pixels (7300).
payloadIn.chop(1);
spectrumLine.insert(spectrumLine.length(), payloadIn.right(payloadIn.length() - 5));
//qDebug() << "sequence: " << sequence << " spec index: " << (sequence-2)*55 << " payloadPosition: " << payloadIn.length() - 5 << " payload length: " << payloadIn.length();
emit haveSpectrumData(spectrumLine, spectrumStartFreq, spectrumEndFreq);
}
/*
if(spectrumLine.length() != 475)
{
qDebug() << "Unusual length spectrum: " << spectrumLine.length();
printHex(spectrumLine, false, true);
}
*/
}
unsigned char rigCommander::bcdHexToDecimal(unsigned char in)
{
unsigned char out = 0;
out = in & 0x0f;
out += ((in & 0xf0) >> 4)*10;
return out;
}
void rigCommander::parseFrequency()
{
// process payloadIn, which is stripped.
// float frequencyMhz
// payloadIn[04] = ; // XX MHz
// payloadIn[03] = ; // XX0 KHz
// payloadIn[02] = ; // X.X KHz
// payloadIn[01] = ; // . XX KHz
// printHex(payloadIn, false, true);
frequencyMhz = 0.0;
if(payloadIn.length() == 7)
{
// 7300 has these digits too, as zeros.
// IC-705 or IC-9700 with higher frequency data available.
frequencyMhz += 100*(payloadIn[05] & 0x0f);
frequencyMhz += (1000*((payloadIn[05] & 0xf0) >> 4));
}
frequencyMhz += payloadIn[04] & 0x0f;
frequencyMhz += 10*((payloadIn[04] & 0xf0) >> 4);
frequencyMhz += ((payloadIn[03] & 0xf0) >>4)/10.0 ;
frequencyMhz += (payloadIn[03] & 0x0f) / 100.0;
frequencyMhz += ((payloadIn[02] & 0xf0) >> 4) / 1000.0;
frequencyMhz += (payloadIn[02] & 0x0f) / 10000.0;
frequencyMhz += ((payloadIn[01] & 0xf0) >> 4) / 100000.0;
frequencyMhz += (payloadIn[01] & 0x0f) / 1000000.0;
emit haveFrequency(frequencyMhz);
}
float rigCommander::parseFrequency(QByteArray data, unsigned char lastPosition)
{
// process payloadIn, which is stripped.
// float frequencyMhz
// payloadIn[04] = ; // XX MHz
// payloadIn[03] = ; // XX0 KHz
// payloadIn[02] = ; // X.X KHz
// payloadIn[01] = ; // . XX KHz
//printHex(data, false, true);
float freq = 0.0;
freq += 100*(data[lastPosition+1] & 0x0f);
freq += (1000*((data[lastPosition+1] & 0xf0) >> 4));
freq += data[lastPosition] & 0x0f;
freq += 10*((data[lastPosition] & 0xf0) >> 4);
freq += ((data[lastPosition-1] & 0xf0) >>4)/10.0 ;
freq += (data[lastPosition-1] & 0x0f) / 100.0;
freq += ((data[lastPosition-2] & 0xf0) >> 4) / 1000.0;
freq += (data[lastPosition-2] & 0x0f) / 10000.0;
freq += ((data[lastPosition-3] & 0xf0) >> 4) / 100000.0;
freq += (data[lastPosition-3] & 0x0f) / 1000000.0;
return freq;
}
void rigCommander::parseMode()
{
QString mode;
// LSB:
//"INDEX: 00 01 02 03 "
//"DATA: 01 00 02 fd "
// USB:
//"INDEX: 00 01 02 03 "
//"DATA: 01 01 02 fd "
//TODO: D-Star DV and DD modes.
switch(payloadIn[01])
{
case '\x00':
mode = "LSB";
break;
case '\x01':
mode = "USB";
break;
case '\x02':
mode = "AM";
break;
case '\x03':
mode = "CW";
break;
case '\x04':
mode = "RTTY";
break;
case '\x05':
mode = "FM";
break;
case '\x07':
mode = "CW-R";
break;
case '\x08':
mode = "RTTY-R";
break;
default:
qDebug() << "Mode: Unknown: " << payloadIn[01];
printHex(payloadIn, false, true);
mode = QString("");
}
emit haveMode(mode);
}
void rigCommander::startATU()
{
QByteArray payload("\x1C\x01\x02");
prepDataAndSend(payload);
}
void rigCommander::setATU(bool enabled)
{
QByteArray payload;
if(enabled)
{
payload.setRawData("\x1C\x01\x01", 3);
} else {
payload.setRawData("\x1C\x01\x00", 3);
}
prepDataAndSend(payload);
}
void rigCommander::getATUStatus()
{
//qDebug() << "Sending out for ATU status in RC.";
QByteArray payload("\x1C\x01");
prepDataAndSend(payload);
}
void rigCommander::getRigID()
{
QByteArray payload;
payload.setRawData("\x19\x00", 2);
prepDataAndSend(payload);
}
void rigCommander::sayAll()
{
QByteArray payload;
payload.setRawData("\x13\x00", 2);
prepDataAndSend(payload);
}
void rigCommander::sayFrequency()
{
QByteArray payload;
payload.setRawData("\x13\x01", 2);
prepDataAndSend(payload);
}
void rigCommander::sayMode()
{
QByteArray payload;
payload.setRawData("\x13\x02", 2);
prepDataAndSend(payload);
}
// Other:
QByteArray rigCommander::stripData(const QByteArray &data, unsigned char cutPosition)
{
QByteArray rtndata;
if(data.length() < cutPosition)
{
return rtndata;
}
rtndata = data.right(cutPosition);
return rtndata;
}
void rigCommander::getDebug()
{
// generic debug function for development.
emit getMoreDebug();
}
void rigCommander::printHex(const QByteArray &pdata, bool printVert, bool printHoriz)
{
qDebug() << "---- Begin hex dump -----:";
QString sdata("DATA: ");
QString index("INDEX: ");
QStringList strings;
for(int i=0; i < pdata.length(); i++)
{
strings << QString("[%1]: %2").arg(i,8,10,QChar('0')).arg((unsigned char)pdata[i], 2, 16, QChar('0'));
sdata.append(QString("%1 ").arg((unsigned char)pdata[i], 2, 16, QChar('0')) );
index.append(QString("%1 ").arg(i, 2, 10, QChar('0')));
}
if(printVert)
{
for(int i=0; i < strings.length(); i++)
{
//sdata = QString(strings.at(i));
qDebug() << strings.at(i);
}
}
if(printHoriz)
{
qDebug() << index;
qDebug() << sdata;
}
qDebug() << "----- End hex dump -----";
}
Reference in a new issue View git blame Copy permalink