og-libsurvive/tools/avr_codegen/test.c

#include <avr/io.h>
#include <avr/interrupt.h>
#include <avr/sleep.h>
#include <util/delay.h>

void delay_ms(uint32_t time) {
  uint32_t i;
  for (i = 0; i < time; i++) {
    _delay_ms(1);
  }
}

#define NOOP asm volatile("nop" ::)


static void setup_clock( void )
{
	/*Examine Page 33*/

	CLKPR = 0x80;	/*Setup CLKPCE to be receptive*/
	CLKPR = 0x00;	/*No scalar*/
	OSCCAL = 0x42; //B8 is bottom E8 is top. 
}

int main( )
{
	int k;
	cli();
	setup_clock();
	DDRB = _BV(4) | _BV(3) | _BV(1);

//	setup_spi();  //XXX WARNING: If you use this, you can't use LED50 since it's on the SPI bus.

	uint8_t marker;

	while(1)
	{
		//0x05 says 0xa9
		//0x06 says 0xb3, 0xb4
		//0x07 says 0xc1
		//0x08 says 0xd4
		// 0xd4 - 0xa9 = 2b (43 base 10) 

		//"marker" = Code from Vive (Operating at OSCCAL = 0x80 = 8 MHz)
		//0x08 = 0xe1
		//0x05 = 0xb4
		//at OSCCAL = 0x70
		//0x05 = 0xa6
		//0x08 = 0xcb
		//  12 = 
		//  13 = 0x85 0x01
		//  14 = 0x95 0x01
		//	15 = 0xa1 0x01
		//0x10 = 0xab 0x01

		// 0x81 0x04
		//  <-    <-

		// First look at 0x04.  There will be another byte because it is less than
		//  128!
		// 0x04<<7 = 0x200 
		//  Because 0x81 is  >= 128, it's a terminator.
		// 0x200 | 0x81 = 0x281 << The actual value
		// 

		// _BV(x) is a synonym for (1<<x)
		#define  LED48 _BV(3)
		#define  LED40 _BV(4) 
		#define  LED50 _BV(1) 
		 //Marker = Length of time for following

		#define DO_MARKER( time, LEDS ) \
			marker = time; do { PORTB = LEDS; marker--; PORTB = 0; } while( marker );
#if 0 //this breaks it?
		DO_MARKER(20, LED50);
		DO_MARKER(20, LED50|LED48);
		DO_MARKER(20, LED48);
		DO_MARKER(20, LED40|LED48);
		DO_MARKER(20, LED40);
		DO_MARKER(20, LED40|LED48);
		DO_MARKER(20, LED40);
		DO_MARKER(20, LED40|LED48);
		DO_MARKER(20, LED40);
		DO_MARKER(20, LED40|LED48);
		DO_MARKER(20, LED40);
		DO_MARKER(20, LED40|LED48);
		DO_MARKER(20, LED40);
#endif

#if 1
DO_MARKER(30, LED48);
DO_MARKER(20, LED48|LED40|LED50);
DO_MARKER(20, LED48|LED40);
DO_MARKER(30, LED48);
DO_MARKER(20, LED48|LED40);
DO_MARKER(20, LED48|LED50);
DO_MARKER(30, LED48);
DO_MARKER(20, LED48|LED40);
DO_MARKER(20, LED48|LED40|LED50);
DO_MARKER(30, LED48);

#endif

#if 0
		DO_MARKER(10, LED50);
		DO_MARKER(50, LED50|LED48);
		DO_MARKER(12, LED48);
#endif


		//DO_MARKER(60, LED50);

//		sendhex2( 5 );
//		sendchr('\n');
/*
		marker = 30;
		do{
			PORTB = _BV(0);
			marker--;
			PORTB = 0;
		} while( marker );
//		_delay_us(80);
		marker = 10;
		do{
			PORTB = _BV(3);
			marker--;
			PORTB = 0;
		} while( marker );

*/

/*		_delay_us(16);
		marker = 20;
		do{
			PORTB = _BV(4);
			marker--;
			PORTB = 0;
		} while( marker );
*/
		//  t b6 b5 b4 b3 b2 b1 b0    t b13 b12 b11 b10 b9 b8 b7
		//  1 0  0  0  0  1  0  1     0  0   0   0   1   0  0  0
		//			8       5               0             8
		//  
		//One pulse;
		//08 [a5] ...  @05
		//08 [da 01] 54 a9 c6 a0 35 fe 2a  @20?   == 218 -> 436
		//08 [e2] e2 46 b3 14 49 3c b2  @10
		//08 [e9] e2 46 b3 14 49 3c b2  @11
		//08 [f5] @12
		//08 [82 01] @13
		//08 [a7 08] @93
		//08 [f7 03] @40 --> 1f7 --. 500(base 10) * 2 -> 750
		//08 [85 08] @80 --> 1029

		//evverything after those 08 08 is two variable length fields of data 
		//one starting after the 0808, and one going in reverse from the end 

		//For two pulses:
		//08 08 [fc]    [a2 01] [a6 01] / a3 42 ca / 4d e0 84 ef (@12) @10us between
		//08 08 [9f 01] [a4 01] [c6 01] e6 53 33 / 76 7c c4 04 (@15)
		//08 08 [a0 01] [b9 01] [c5 01] aa e9 cd / e6 da 0b cc (@15) @10us between
		//08 08 [da 01] [b8 01] [c5 01] 90 9e 4a / d8 8a e1 55 (@20/@15) @10us between
		//08 08 [db 01] [b8 01] [80 02] 1a f1 4a / a2 04 98 a0 (@20/@20) @10us between!
		//08 08 [db 01] [a8] [9f 02] 99 27 07 5b / 7e 42 64 (@20/@20) @5us between!
		//[sensor codes] [pulse time1] [length of time between pulses] [pulse time2]

		//3 pulses, equal length:
		// [78 78 78] [f0 01] [c7] [aa 02] [c7] [aa 02] 9f df 90 7d 35 11 c5 
		// (78) (78) (78) [b3 02] [94 01] [9b 02] [95 01] [9b 02]   97 5b 8c 14 af 08 43 
		

		//_delay_us(1000000/60);
		//_delay_ms(10); //actually 5.3ms
		_delay_ms(32);
	}

	return 0;
}