mmo-ref/polserver
1
0
Fork 0
mirror of https://github.com/polserver/polserver synced 2026-08-13 08:23:08 -04:00
Code Issues Projects Releases Packages Wiki Activity
polserver/cmake/core_tests.cmake
Fernando Rozenblit 721e4fefe0
Refactor Item states to be explicit instead of implicit (#919) 
* extend tests

* more tests for world save

* explicit handle the special layers in wornitem

* add Location variant and relocate() methods

* refactor GottenItem and ensure Chr, not wornitems, is saved

* deflake escript watch test

* dropitem and undo refactoring

* uomod changes

* add more item tests (buy, sell, hair...)

* use location for undoing trade container properly

* rewrite loaddata to use relocate, fixing startup crashes

* do remaining location changes

* fix CI tests

* remove container pointer from item and add wearer() reference

* remove layer writes and explicit intrinsic weapon handling

* add preparing state for fresh items without serial number

* move wornitems to detached state only when it has a serial number

* load corpse items into the correct layer

* do not set a layer on load before the item is equipped

* add more tests to equipped and intrinsic items

* remove layer and substitute with the location()

* add core-changes summary

* mark items as being worn on corpse if they only moved within the corpse

* block Preparing from being reached, just to be sure

* added integrity sweep check

* Reduce direect changes to item location

* Add Item::move_into() and rewrite calling sites

* Fix container slots

* get rid of the slot_index on the item, because Location() already has it

* fix race in test leading to macos issues

* fix dangling pointer

* remove corpse can_equip_list and rely on the GottenItem rules to dress the corpse again

* let item->destroy() detach the item

* make integrity checks fail the tests

* use place_at(item, newpos) for changing item position InWorld

* add boat test for item moved out of boat that should not be visible anymore

* use place_at() in more places

* ensure CreateItemAtLocation really does

* fix Claude instructions

* remove state we didn't need

* fine tuning

* reduce test flakiness
2026-08-10 18:17:53 +00:00

263 lines
9.1 KiB
CMake
Raw Permalink Blame History

set(testsuite ${CMAKE_CURRENT_SOURCE_DIR}/testsuite/pol)
# cleanup as initial fixture, to have at the end of the run still all testdata
add_test(NAME cleantestdir
COMMAND ${CMAKE_COMMAND} -E rm -rf coretest
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
)
set_tests_properties(cleantestdir PROPERTIES FIXTURES_SETUP "client;initial_cleanup")
# uoconvert tests
add_test(NAME uoconvert_test_map0_hsa
COMMAND poltool testfiles
outdir=coretest/convert_test/client
width=768
height=4096
mapid=0
hsa=1
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
)
set_tests_properties(uoconvert_test_map0_hsa PROPERTIES FIXTURES_REQUIRED initial_cleanup)
set_tests_properties(uoconvert_test_map0_hsa PROPERTIES FIXTURES_SETUP uoconvert_tests_map0)
add_test(NAME uoconvert_test_setup_map1_no_hsa
COMMAND poltool testfiles
outdir=coretest/convert_test/client
width=640
height=4096
mapid=1
hsa=0
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
)
set_tests_properties(uoconvert_test_setup_map1_no_hsa PROPERTIES FIXTURES_REQUIRED initial_cleanup)
set_tests_properties(uoconvert_test_setup_map1_no_hsa PROPERTIES FIXTURES_SETUP uoconvert_tests_map1)
add_test(NAME uoconvert_test_convert_map0
COMMAND uoconvert map realm=britannia
mapid=0
uodata=client
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/coretest/convert_test
)
set_tests_properties( uoconvert_test_convert_map0 PROPERTIES FIXTURES_REQUIRED uoconvert_tests_map0)
add_test(NAME uoconvert_test_convert_map1
COMMAND uoconvert map realm=britannia2
mapid=1
uodata=client
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/coretest/convert_test
)
set_tests_properties( uoconvert_test_convert_map1 PROPERTIES FIXTURES_REQUIRED uoconvert_tests_map1)
# generate client files, minimal distro and needed core cfgs
add_test(NAME testenv_map1
COMMAND poltool testfiles
outdir=coretest/client
width=1600
height=1600
mapid=1
hsa=0
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
)
set_tests_properties(testenv_map1 PROPERTIES DEPENDS cleantestdir)
set_tests_properties(testenv_map1 PROPERTIES FIXTURES_SETUP client)
add_test(NAME testenv
COMMAND poltool testenv
outdir=coretest
width=192
height=192
mapid=0
hsa=0
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
)
set_tests_properties(testenv PROPERTIES DEPENDS testenv_map1)
set_tests_properties(testenv PROPERTIES FIXTURES_SETUP client)
add_test(NAME shard_files
COMMAND ${CMAKE_COMMAND} -E copy_directory ${testsuite} coretest
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
)
set_tests_properties(shard_files PROPERTIES DEPENDS testenv)
set_tests_properties(shard_files PROPERTIES FIXTURES_SETUP shard)
add_test(NAME shard_ecompile_cfg
COMMAND ${CMAKE_COMMAND}
-Dtestdir=${CMAKE_BINARY_DIR}/coretest
-Decompile_cfg=${testsuite}/ecompile.cfg
-Dmodules=${CMAKE_SOURCE_DIR}/pol-core/support/scripts
-P ${CMAKE_CURRENT_SOURCE_DIR}/cmake/core_tests_ecompile_cfg.cmake
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}
)
set_tests_properties(shard_ecompile_cfg PROPERTIES DEPENDS shard_files)
set_tests_properties(shard_ecompile_cfg PROPERTIES FIXTURES_SETUP shard)
# uoconvert part
add_test(NAME uoconvert_map
COMMAND uoconvert map realm=britannia
width=192 height=192
uodata=client
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/coretest
)
set_tests_properties( uoconvert_map PROPERTIES FIXTURES_REQUIRED client)
set_tests_properties( uoconvert_map PROPERTIES FIXTURES_SETUP uoconvert)
add_test(NAME uoconvert_statics
COMMAND uoconvert statics realm=britannia
uodata=client
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/coretest
)
set_tests_properties( uoconvert_statics PROPERTIES DEPENDS uoconvert_map)
set_tests_properties( uoconvert_statics PROPERTIES FIXTURES_REQUIRED client)
set_tests_properties( uoconvert_statics PROPERTIES FIXTURES_SETUP uoconvert)
add_test(NAME uoconvert_maptile
COMMAND uoconvert maptile realm=britannia
uodata=client
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/coretest
)
set_tests_properties( uoconvert_maptile PROPERTIES FIXTURES_REQUIRED client)
set_tests_properties( uoconvert_maptile PROPERTIES DEPENDS uoconvert_map)
set_tests_properties( uoconvert_maptile PROPERTIES FIXTURES_SETUP uoconvert)
add_test(NAME uoconvert_map2
COMMAND uoconvert map realm=britannia2
width=1600
height=1600
mapid=1
uodata=client
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/coretest
)
set_tests_properties( uoconvert_map2 PROPERTIES DEPENDS uoconvert_maptile)
set_tests_properties( uoconvert_map2 PROPERTIES FIXTURES_REQUIRED client)
set_tests_properties( uoconvert_map2 PROPERTIES FIXTURES_SETUP uoconvert)
add_test(NAME uoconvert_statics2
COMMAND uoconvert statics realm=britannia2
uodata=client
mapid=1
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/coretest
)
set_tests_properties( uoconvert_statics2 PROPERTIES DEPENDS uoconvert_map2)
set_tests_properties( uoconvert_statics2 PROPERTIES FIXTURES_REQUIRED client)
set_tests_properties( uoconvert_statics2 PROPERTIES FIXTURES_SETUP uoconvert)
add_test(NAME uoconvert_maptile2
COMMAND uoconvert maptile realm=britannia2
uodata=client
mapid=1
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/coretest
)
set_tests_properties( uoconvert_maptile2 PROPERTIES FIXTURES_REQUIRED client)
set_tests_properties( uoconvert_maptile2 PROPERTIES DEPENDS uoconvert_map2)
set_tests_properties( uoconvert_maptile2 PROPERTIES FIXTURES_SETUP uoconvert)
add_test(NAME uoconvert_tiles
COMMAND uoconvert tiles
uodata=client
outdir=config
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/coretest
)
set_tests_properties( uoconvert_tiles PROPERTIES FIXTURES_REQUIRED "client;shard")
set_tests_properties( uoconvert_tiles PROPERTIES FIXTURES_SETUP uoconvert)
add_test(NAME uoconvert_landtiles
COMMAND uoconvert landtiles
uodata=client
outdir=config
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/coretest
)
set_tests_properties( uoconvert_landtiles PROPERTIES FIXTURES_REQUIRED "client;shard")
set_tests_properties( uoconvert_landtiles PROPERTIES FIXTURES_SETUP uoconvert)
add_test(NAME uoconvert_multis
COMMAND uoconvert multis
uodata=client
outdir=config
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/coretest
)
set_tests_properties( uoconvert_multis PROPERTIES FIXTURES_REQUIRED "client;shard")
set_tests_properties( uoconvert_multis PROPERTIES FIXTURES_SETUP uoconvert)
add_test(NAME shard_ecompile
COMMAND ecompile -A -x
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/coretest
)
set_tests_properties( shard_ecompile PROPERTIES FIXTURES_REQUIRED shard)
set_tests_properties( shard_ecompile PROPERTIES FIXTURES_SETUP ecompile)
# first test run
find_package(Python3 QUIET COMPONENTS Interpreter)
if (${Python3_FOUND})
execute_process(
COMMAND ${Python3_EXECUTABLE} -c "import aiosmtpd"
RESULT_VARIABLE _aiosmtpd_status
OUTPUT_QUIET
ERROR_QUIET
)
if(_aiosmtpd_status EQUAL 0)
set(HAS_AIOSMTPD TRUE)
else()
set(HAS_AIOSMTPD FALSE)
endif()
add_test(NAME shard_test_1
COMMAND ${CMAKE_COMMAND}
-Dpol=$<TARGET_FILE:pol>
-Dtestdir=${CMAKE_CURRENT_SOURCE_DIR}/testsuite
-Dtestemail=${HAS_AIOSMTPD}
-P ${CMAKE_CURRENT_SOURCE_DIR}/cmake/core_tests_start.cmake
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/coretest
)
add_test(NAME ecompile_watch_test
COMMAND ${CMAKE_COMMAND}
-Decompile=$<TARGET_FILE:ecompile>
-Dtestdir=${CMAKE_CURRENT_SOURCE_DIR}/testsuite
-P ${CMAKE_CURRENT_SOURCE_DIR}/cmake/core_tests_ecompile_watch.cmake
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/coretest
)
set_tests_properties(ecompile_watch_test PROPERTIES FIXTURES_REQUIRED shard)
else()
message(" - core test without testclient python3 not found")
add_test(NAME shard_test_1
COMMAND pol
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/coretest
)
endif()
set_tests_properties( shard_test_1 PROPERTIES FIXTURES_REQUIRED "client;shard;uoconvert;ecompile")
# needed for test_env
set_tests_properties( shard_test_1 PROPERTIES ENVIRONMENT "POLCORE_TEST=1;POLCORE_TEST_RUN=1;POLCORE_TEST_NOACCESS=foo;POLCORE_TESTCLIENT=${Python3_FOUND};POLCORE_TESTEMAIL=${HAS_AIOSMTPD};POLCORE_TESTSLOWREADER=${Python3_FOUND}")
set_tests_properties(shard_test_1 PROPERTIES FIXTURES_SETUP shard_test)
# second test run
add_test(NAME shard_test_2
COMMAND pol
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/coretest
)
set_tests_properties( shard_test_2 PROPERTIES FIXTURES_REQUIRED "client;shard;uoconvert;ecompile;shard_test")
set_tests_properties( shard_test_2 PROPERTIES ENVIRONMENT "POLCORE_TEST_RUN=2")
# world-save round trip: load the world the previous pass wrote, save it again, compare.
# Needs python for the normalising comparer, and runs last because it re-saves data/.
if (${Python3_FOUND})
add_test(NAME shard_test_roundtrip
COMMAND ${CMAKE_COMMAND}
-Dpol=$<TARGET_FILE:pol>
-Dtestdir=${CMAKE_CURRENT_SOURCE_DIR}/testsuite
-P ${CMAKE_CURRENT_SOURCE_DIR}/cmake/core_tests_roundtrip.cmake
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/coretest
)
set_tests_properties( shard_test_roundtrip PROPERTIES FIXTURES_REQUIRED "client;shard;uoconvert;ecompile;shard_test")
set_tests_properties( shard_test_roundtrip PROPERTIES DEPENDS shard_test_2)
endif()
# unit test
add_test(NAME unittest_pol
COMMAND pol -test
WORKING_DIRECTORY ${CMAKE_BINARY_DIR}/coretest
)
set_tests_properties( unittest_pol PROPERTIES FIXTURES_REQUIRED "client;shard;uoconvert;ecompile")
Reference in a new issue View git blame Copy permalink