mirror of
https://github.com/LFManifesto/ReticulumHF
synced 2026-08-14 19:31:48 -04:00
be77b04f2c
Major changes: - Removed all I2P functionality (HF radio focus) - Fixed service startup timing (freedvtnc2 before rnsd) - Fixed first-boot not marking setup_complete prematurely - Fixed wizard step numbering (8 steps, not 9) - Updated README with accurate workflow and documentation Bug fixes (closes #2-#8): - #8: Field WiFi no longer overrides ReticulumHF-Setup - #7: ALSA config included for freedvtnc2 - #6: Client list uses ARP table for accuracy - #5: Digirig partial detection now reported correctly - #4: fake-hwclock preserves date across reboots - #3: Set Audio validates and returns actual errors - #2: I2P removed (was never fully functional) Tested and verified: - Fresh image boot and first-boot completion - Setup wizard flow - Sideband TCP connection - HF announce triggers radio PTT correctly Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
271 lines
8.1 KiB
Bash
Executable file
271 lines
8.1 KiB
Bash
Executable file
#!/bin/bash
|
|
# ReticulumHF First Boot Script
|
|
# Verifies pre-installed software and activates WiFi AP using hostapd/dnsmasq
|
|
# All software is pre-installed in the image - NO compilation needed
|
|
#
|
|
# NOTE: Do NOT use 'set -e' - we need robust error handling
|
|
|
|
LOG="/var/log/reticulumhf-firstboot.log"
|
|
SETUP_COMPLETE="/etc/reticulumhf/.setup_complete"
|
|
|
|
# Ensure log directory exists
|
|
touch "$LOG" 2>/dev/null || LOG="/tmp/reticulumhf-firstboot.log"
|
|
|
|
log() {
|
|
echo "[$(date '+%Y-%m-%d %H:%M:%S')] $1" >> "$LOG"
|
|
echo "[$(date '+%Y-%m-%d %H:%M:%S')] $1"
|
|
}
|
|
|
|
# Check if already complete
|
|
if [ -f "$SETUP_COMPLETE" ]; then
|
|
log "Setup already complete, skipping first-boot"
|
|
exit 0
|
|
fi
|
|
|
|
log "============================================"
|
|
log "ReticulumHF First Boot Starting"
|
|
log "============================================"
|
|
|
|
mkdir -p /run/reticulumhf || log "WARN: Failed to create /run/reticulumhf"
|
|
mkdir -p /etc/reticulumhf || { log "ERROR: Cannot create /etc/reticulumhf"; exit 1; }
|
|
mkdir -p /etc/reticulumhf/backups || log "WARN: Failed to create backups directory"
|
|
|
|
# Backup original configuration files for recovery
|
|
log "Creating configuration backups..."
|
|
if [ -f /etc/hostapd/hostapd.conf ]; then
|
|
cp /etc/hostapd/hostapd.conf /etc/reticulumhf/backups/hostapd.conf.default 2>/dev/null
|
|
log " [OK] hostapd.conf backed up"
|
|
fi
|
|
if [ -f /etc/dnsmasq.d/reticulumhf.conf ]; then
|
|
cp /etc/dnsmasq.d/reticulumhf.conf /etc/reticulumhf/backups/dnsmasq.conf.default 2>/dev/null
|
|
log " [OK] dnsmasq.conf backed up"
|
|
fi
|
|
if [ -f /etc/dhcpcd.conf ]; then
|
|
cp /etc/dhcpcd.conf /etc/reticulumhf/backups/dhcpcd.conf.default 2>/dev/null
|
|
log " [OK] dhcpcd.conf backed up"
|
|
fi
|
|
|
|
# Give system time to fully initialize
|
|
log "Waiting for system initialization..."
|
|
sleep 5
|
|
|
|
# Verify pre-installed software
|
|
log "Verifying pre-installed software..."
|
|
|
|
if ldconfig -p 2>/dev/null | grep -q libcodec2; then
|
|
log " [OK] codec2 library found"
|
|
else
|
|
log " [WARN] codec2 not found"
|
|
fi
|
|
|
|
if [ -x /home/pi/.local/bin/rnstatus ]; then
|
|
log " [OK] RNS installed"
|
|
elif [ -d /home/pi/.local/pipx/venvs/rns ]; then
|
|
log " [WARN] RNS venv exists but symlink missing"
|
|
else
|
|
log " [WARN] RNS not found"
|
|
fi
|
|
|
|
if [ -x /home/pi/.local/bin/freedvtnc2 ]; then
|
|
log " [OK] freedvtnc2 installed"
|
|
elif [ -d /home/pi/.local/pipx/venvs/freedvtnc2 ]; then
|
|
log " [WARN] freedvtnc2 venv exists but symlink missing"
|
|
else
|
|
log " [WARN] freedvtnc2 not found"
|
|
fi
|
|
|
|
if command -v rigctl &> /dev/null; then
|
|
log " [OK] hamlib (rigctl) installed"
|
|
else
|
|
log " [WARN] hamlib not found"
|
|
fi
|
|
|
|
log ""
|
|
log "Setting up WiFi AP with hostapd..."
|
|
|
|
# Unblock WiFi
|
|
log "Unblocking WiFi..."
|
|
rfkill unblock wlan 2>&1 || log " rfkill not needed or failed"
|
|
|
|
# Wait for wlan0
|
|
log "Waiting for wlan0 interface..."
|
|
WLAN_FOUND=0
|
|
for i in {1..30}; do
|
|
if ip link show wlan0 &>/dev/null; then
|
|
log " wlan0 found after $i seconds"
|
|
WLAN_FOUND=1
|
|
break
|
|
fi
|
|
sleep 1
|
|
done
|
|
|
|
if [ "$WLAN_FOUND" -eq 0 ]; then
|
|
log " [ERROR] wlan0 not found after 30 seconds"
|
|
INTERFACES=$(ip link show 2>/dev/null | grep -E '^[0-9]+:' | cut -d: -f2 | tr -d ' ')
|
|
log " Available interfaces: $INTERFACES"
|
|
log " [ERROR] First boot FAILED - do NOT mark as complete"
|
|
log " To retry: delete /etc/reticulumhf/.setup_complete and reboot"
|
|
# DO NOT mark setup_complete on failure - this prevents recovery
|
|
exit 1
|
|
fi
|
|
|
|
# Bring up wlan0 with static IP (dhcpcd should handle this)
|
|
log "Bringing up wlan0..."
|
|
ip link set wlan0 up 2>&1 || log " Could not bring up wlan0"
|
|
sleep 2
|
|
|
|
# Verify static IP is assigned
|
|
IP_ADDR=$(ip addr show wlan0 2>/dev/null | grep 'inet ' | awk '{print $2}')
|
|
if [ -n "$IP_ADDR" ]; then
|
|
log " wlan0 IP: $IP_ADDR"
|
|
else
|
|
log " Manually assigning 192.168.4.1/24..."
|
|
ip addr add 192.168.4.1/24 dev wlan0 2>&1 || log " Could not assign IP (may already exist)"
|
|
fi
|
|
|
|
# Start hostapd
|
|
log "Starting hostapd..."
|
|
if [ -f /etc/hostapd/hostapd.conf ]; then
|
|
systemctl unmask hostapd 2>/dev/null || true
|
|
HOSTAPD_OUTPUT=$(systemctl start hostapd 2>&1)
|
|
HOSTAPD_EXIT=$?
|
|
log " hostapd start exit code: $HOSTAPD_EXIT"
|
|
if [ $HOSTAPD_EXIT -ne 0 ]; then
|
|
log " hostapd error: $HOSTAPD_OUTPUT"
|
|
log " Trying hostapd directly..."
|
|
hostapd -B /etc/hostapd/hostapd.conf 2>&1 || log " Direct hostapd also failed"
|
|
fi
|
|
sleep 2
|
|
else
|
|
log " [ERROR] /etc/hostapd/hostapd.conf not found"
|
|
fi
|
|
|
|
# Check hostapd status
|
|
HOSTAPD_RUNNING=0
|
|
if pgrep hostapd &>/dev/null; then
|
|
log " [OK] hostapd is running"
|
|
HOSTAPD_RUNNING=1
|
|
# Enable for persistence after reboot
|
|
systemctl enable hostapd 2>/dev/null || true
|
|
log " [OK] hostapd enabled for boot"
|
|
else
|
|
log " [ERROR] hostapd not running"
|
|
journalctl -u hostapd --no-pager -n 10 >> "$LOG" 2>&1
|
|
fi
|
|
|
|
# Start dnsmasq
|
|
log "Starting dnsmasq..."
|
|
if [ -f /etc/dnsmasq.d/reticulumhf.conf ]; then
|
|
systemctl start dnsmasq 2>&1
|
|
DNSMASQ_EXIT=$?
|
|
log " dnsmasq start exit code: $DNSMASQ_EXIT"
|
|
sleep 2
|
|
else
|
|
log " [ERROR] /etc/dnsmasq.d/reticulumhf.conf not found"
|
|
fi
|
|
|
|
# Check dnsmasq status
|
|
DNSMASQ_RUNNING=0
|
|
if pgrep dnsmasq &>/dev/null; then
|
|
log " [OK] dnsmasq is running"
|
|
DNSMASQ_RUNNING=1
|
|
# Enable for persistence after reboot
|
|
systemctl enable dnsmasq 2>/dev/null || true
|
|
log " [OK] dnsmasq enabled for boot"
|
|
else
|
|
log " [ERROR] dnsmasq not running"
|
|
journalctl -u dnsmasq --no-pager -n 10 >> "$LOG" 2>&1
|
|
fi
|
|
|
|
# Configure RNS for TCP bridge
|
|
log "Configuring RNS..."
|
|
RNS_CONFIG_DIR="/home/pi/.reticulum"
|
|
RNS_CONFIG_SRC="/opt/reticulumhf/configs/rns-config"
|
|
|
|
if [ -f "$RNS_CONFIG_SRC" ]; then
|
|
mkdir -p "$RNS_CONFIG_DIR"
|
|
cp "$RNS_CONFIG_SRC" "$RNS_CONFIG_DIR/config"
|
|
chown -R pi:pi "$RNS_CONFIG_DIR"
|
|
chmod 700 "$RNS_CONFIG_DIR"
|
|
chmod 600 "$RNS_CONFIG_DIR/config"
|
|
log " [OK] RNS config installed"
|
|
else
|
|
log " [WARN] RNS config not found at $RNS_CONFIG_SRC"
|
|
fi
|
|
|
|
# Restart RNS daemon to load new config
|
|
log "Starting RNS daemon..."
|
|
systemctl enable reticulumhf-rnsd 2>/dev/null || true
|
|
# Use restart (not start) to ensure config is reloaded
|
|
RNSD_OUTPUT=$(systemctl restart reticulumhf-rnsd 2>&1)
|
|
RNSD_EXIT=$?
|
|
log " rnsd restart exit code: $RNSD_EXIT"
|
|
sleep 5
|
|
|
|
RNSD_RUNNING=0
|
|
if pgrep -f "rnsd" &>/dev/null; then
|
|
log " [OK] rnsd is running"
|
|
RNSD_RUNNING=1
|
|
# Check if TCP port is listening
|
|
if ss -tlnp 2>/dev/null | grep -q ':4242'; then
|
|
log " [OK] RNS TCP server listening on port 4242"
|
|
else
|
|
log " [WARN] RNS TCP port 4242 not yet listening"
|
|
fi
|
|
else
|
|
log " [ERROR] rnsd not running"
|
|
journalctl -u reticulumhf-rnsd --no-pager -n 10 >> "$LOG" 2>&1
|
|
fi
|
|
|
|
# Start the setup portal service
|
|
log "Starting setup portal service..."
|
|
systemctl enable reticulumhf-portal 2>/dev/null || true
|
|
PORTAL_OUTPUT=$(systemctl start reticulumhf-portal 2>&1)
|
|
PORTAL_EXIT=$?
|
|
log " portal service start exit code: $PORTAL_EXIT"
|
|
|
|
sleep 3
|
|
|
|
PORTAL_RUNNING=0
|
|
if systemctl is-active reticulumhf-portal &>/dev/null; then
|
|
log " [OK] Setup portal service is running"
|
|
PORTAL_RUNNING=1
|
|
if ss -tlnp 2>/dev/null | grep -q ':80'; then
|
|
log " [OK] Setup portal listening on port 80"
|
|
else
|
|
log " [WARN] Nothing listening on port 80 yet"
|
|
fi
|
|
else
|
|
log " [ERROR] Setup portal service failed"
|
|
journalctl -u reticulumhf-portal --no-pager -n 10 >> "$LOG" 2>&1
|
|
fi
|
|
|
|
# NOTE: Do NOT mark setup_complete here - wizard does this after radio config
|
|
# The .setup_complete flag is created by /api/complete-setup in app.py
|
|
|
|
log ""
|
|
log "============================================"
|
|
log " ReticulumHF First Boot Complete"
|
|
log "============================================"
|
|
log ""
|
|
|
|
if [ $HOSTAPD_RUNNING -eq 1 ] && [ $DNSMASQ_RUNNING -eq 1 ]; then
|
|
log " WiFi AP: ReticulumHF-Setup"
|
|
log " Password: reticulumhf"
|
|
log " Portal: http://192.168.4.1"
|
|
else
|
|
log " [ERROR] WiFi AP services not all running"
|
|
log " hostapd: $HOSTAPD_RUNNING, dnsmasq: $DNSMASQ_RUNNING"
|
|
fi
|
|
|
|
if [ $RNSD_RUNNING -eq 1 ]; then
|
|
log " RNS TCP: 192.168.4.1:4242 (for Sideband)"
|
|
else
|
|
log " [ERROR] RNS daemon not running"
|
|
fi
|
|
|
|
log ""
|
|
log " Log file: $LOG"
|
|
log "============================================"
|
|
|
|
exit 0
|