OrcaStudio/tests/fff_print/test_printobject.cpp

#include <catch2/catch_all.hpp>

#include "libslic3r/libslic3r.h"
#include "libslic3r/Print.hpp"
#include "libslic3r/Layer.hpp"
#include "libslic3r/GCodeReader.hpp"

#include "test_helpers.hpp"

#include <iterator>
#include <set>

using namespace Slic3r;
using namespace Slic3r::Test;

SCENARIO("Object layer heights", "[PrintObject]") {
    GIVEN("A 20mm cube") {
        WHEN("sliced with a 2mm layer height and a 3mm nozzle") {
            Slic3r::Print print;
            Slic3r::Test::init_and_process_print({cube(20)}, print, {
                { "initial_layer_print_height", 2 },
                { "layer_height",               2 },
                { "nozzle_diameter",            3 }
	        });
            ConstLayerPtrsAdaptor layers = print.objects().front()->layers();
            THEN("The output vector has 10 entries") {
                REQUIRE(layers.size() == 10);
            }
            AND_THEN("Each layer is approximately 2mm above the previous Z") {
                coordf_t last = 0.0;
                for (size_t i = 0; i < layers.size(); ++ i) {
                    REQUIRE_THAT(layers[i]->print_z - last, Catch::Matchers::WithinAbs(2.0, 1e-4));
                    last = layers[i]->print_z;
                }
            }
        }
        WHEN("sliced with a 10mm layer height and an 11mm nozzle") {
            Slic3r::Print print;
            Slic3r::Test::init_and_process_print({cube(20)}, print, {
                { "initial_layer_print_height", 2 },
                { "layer_height",               10 },
                { "nozzle_diameter",            11 }
	        });
            ConstLayerPtrsAdaptor layers = print.objects().front()->layers();
			THEN("The output vector has 3 entries") {
                REQUIRE(layers.size() == 3);
            }
            AND_THEN("Layer 0 is at 2mm") {
                REQUIRE_THAT(layers.front()->print_z, Catch::Matchers::WithinAbs(2.0, 1e-4));
            }
            AND_THEN("Layer 1 is at 12mm") {
                REQUIRE_THAT(layers[1]->print_z, Catch::Matchers::WithinAbs(12.0, 1e-4));
            }
        }
        WHEN("sliced with a 15mm layer height and a 16mm nozzle") {
            Slic3r::Print print;
            Slic3r::Test::init_and_process_print({cube(20)}, print, {
                { "initial_layer_print_height", 2 },
                { "layer_height",               15 },
                { "nozzle_diameter",            16 }
	        });
            ConstLayerPtrsAdaptor layers = print.objects().front()->layers();
			THEN("The output vector has 2 entries") {
                REQUIRE(layers.size() == 2);
            }
            AND_THEN("Layer 0 is at 2mm") {
                REQUIRE_THAT(layers[0]->print_z, Catch::Matchers::WithinAbs(2.0, 1e-4));
            }
            AND_THEN("Layer 1 is at 17mm") {
                REQUIRE_THAT(layers[1]->print_z, Catch::Matchers::WithinAbs(17.0, 1e-4));
            }
        }
        WHEN("layer height exceeds the nozzle diameter") {
            // Orca does not clamp an over-large layer height to the nozzle; it
            // rejects the slice during flow computation. Pin that behavior.
            THEN("Slicing is rejected") {
                Slic3r::Print print;
                REQUIRE_THROWS(Slic3r::Test::init_and_process_print({cube(20)}, print, {
                    { "initial_layer_print_height", 0.3 },
                    { "layer_height",               0.5 },
                    { "nozzle_diameter",            0.4 }
                }));
            }
        }
    }
}

SCENARIO("Perimeter generation", "[PrintObject]") {
    GIVEN("20mm cube and default config") {
        WHEN("make_perimeters() is called")  {
            Slic3r::Print print;
            Slic3r::Test::init_and_process_print({cube(20)}, print, { { "sparse_infill_density", 0 } });
			const PrintObject &object = *print.objects().front();
            THEN("Every layer in region 0 has 1 island of perimeters") {
                for (const Layer *layer : object.layers())
                    REQUIRE(layer->regions().front()->perimeters.entities.size() == 1);
            }
        }
        WHEN("wall_loops is set to 3")  {
            Slic3r::Print print;
            Slic3r::Test::init_and_process_print({cube(20)}, print, {
                { "sparse_infill_density", 0 },
                { "wall_loops",            3 }
            });
            const PrintObject &object = *print.objects().front();
            THEN("Every layer in region 0 has 3 perimeter loops") {
                for (const Layer *layer : object.layers())
                    REQUIRE(layer->regions().front()->perimeters.items_count() == 3);
            }
        }
    }
}

TEST_CASE("Initial layer height is honored", "[PrintObject]")
{
    const std::string gcode = Slic3r::Test::slice({cube(20)}, {
        { "initial_layer_print_height", 0.3 },
        { "layer_height",               0.2 },
        { "z_hop",                      0 } // keep recorded Z equal to the printed layer height
    });

    std::set<double> layer_zs;
    GCodeReader reader;
    reader.parse_buffer(gcode, [&layer_zs] (GCodeReader& self, const GCodeReader::GCodeLine& line) {
        if (line.extruding(self) && line.dist_XY(self) > 0)
            layer_zs.insert(self.z());
    });

    REQUIRE(layer_zs.size() > 1);
    REQUIRE_THAT(*layer_zs.begin(),            Catch::Matchers::WithinAbs(0.3, 1e-4));
    REQUIRE_THAT(*std::next(layer_zs.begin()), Catch::Matchers::WithinAbs(0.5, 1e-4));
}